PM403: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:
The '''PM 403''' personality module is a disassembly probe for the [[MOS Technology 6502]] microprocessor.  
The '''PM 403''' personality module is a disassembly probe for the [[MOS Technology 6502]] microprocessor.  
It can be used with the [[1230]], [[1225]] and [[1220]] logic analyzers.  
It can be used with the [[1230]], [[1225]] and [[1220]] logic analyzers.  
Note from operators manual:
<blockquote>
''DISASSEMBLY DISPLAY''
''Microprocessor disassembly is  an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to  use the setup for the microprocessor probe. If you want to use the micropro-cessor probe's setup, press ENTER to load it.  Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in  the operator's manual for each microprocessor disassembly probe. ''
</blockquote>


==ROM image==
==ROM image==

Revision as of 15:51, 28 June 2024

Tektronix PM403
Disassembly Probe for 6502
Image needed

Compatible with 1220 1225 1230

Produced from (?) to (?)

Manuals
  • please add
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The PM 403 personality module is a disassembly probe for the MOS Technology 6502 microprocessor. It can be used with the 1230, 1225 and 1220 logic analyzers.

ROM image

See also

Key Specifications

  • please add

Pictures

Note that the ribbon cables are connected to the board via transition connectors (i.e. not an IDC socket mated with header pins) and thus could not be removed for these photos without desoldering/disassembly. This was done to keep the PCB assembly's profile low so it would fit into the PacTec case.

Retrieved from "https://w140.com/tekwiki/index.php?title=PM403&oldid=94946"