P6463: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The '''Tektronix P6463''' is a 25 to 50 Mhz TTL/CMOS pattern generator probe for the DAS9100 logic analyzers. It interfaces to 91S32 and cards. The P6463 uses the P...") |
No edit summary |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
The '''Tektronix P6463''' is a | The '''Tektronix P6463''' is a 25 MHz to 50 MHz TTL/CMOS pattern generator probe for the [[DAS9100]] logic analyzers. It interfaces to [[91S32]] and cards. | ||
The P6463 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | The P6463 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | ||
==Specifications== | ==Specifications== | ||
The probe can either be used at | The probe can either be used at 50 MHz with 9 channels or 25 MHz with 16 channels. | ||
The P6463 is described in the [[Media:070-5959-09.pdf|DAS 9200 Technician’s Reference]]. | |||
==Photos== | |||
<gallery> | |||
Tek p6463a 1.jpg | |||
Tek p6463a 2.jpg | |||
</gallery> | |||
[[Category:Logic analyzer probes]] | [[Category:Logic analyzer probes]] | ||
[[Category:Manual needed]] | |||
Latest revision as of 08:59, 19 August 2024
The Tektronix P6463 is a 25 MHz to 50 MHz TTL/CMOS pattern generator probe for the DAS9100 logic analyzers. It interfaces to 91S32 and cards.
The P6463 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Specifications
The probe can either be used at 50 MHz with 9 channels or 25 MHz with 16 channels.
The P6463 is described in the DAS 9200 Technician’s Reference.
