P6007: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (12 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
* [ | {{Probe Sidebar | ||
|manufacturer=Tektronix | |||
|model=P6007 | |||
|summary=25 MHz, 100×, HV, Passive Probe | |||
|image=Tek p6007 1.jpg | |||
|caption=P6007 | |||
|for=1 MΩ scope inputs | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [[Media:070-0388-01.pdf|Tektronix P6007 Manual]] | |||
* [[Media:Tek p6007 p6009 p6015 cat.pdf|Tektronix P6007 P6009 P6015 Catalog Description]] | |||
}} | |||
The '''Tektronix P6007''' is a medium voltage, 100×, passive probe for use with 1 MΩ input scopes. | |||
It has a BNC connector with no [[readout encoding pin]]. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Bandwidth | 25 MHz }} | {{Spec | Bandwidth | 25 MHz }} | ||
{{Spec | Attenuation | | {{Spec | Attenuation | 100× ±3% }} | ||
{{Spec | Input impedance | | {{Spec | Maximum input | 1.5 kV DC or 4.2 kV AC p-p, must be derated at higher frequencies }} | ||
{{Spec | Compensation | {{Spec | Input impedance | 10 MΩ plus 2.0 to 2.8 pF, depending on cable length and scope input capacitance }} | ||
{{Spec | Compensation range | 15-55 pF }} | |||
{{EndSpecs}} | {{EndSpecs}} | ||
<gallery> | |||
Tek p6007 1.jpg | |||
Tek p6007 2.jpg | |||
</gallery> | |||
[[Category:1 | [[Category:1 MΩ Oscilloscope probes]] | ||
[[Category:6-32 probes]] | |||
Latest revision as of 14:36, 22 December 2023
The Tektronix P6007 is a medium voltage, 100×, passive probe for use with 1 MΩ input scopes. It has a BNC connector with no readout encoding pin.
Key Specifications
| Bandwidth | 25 MHz |
|---|---|
| Attenuation | 100× ±3% |
| Maximum input | 1.5 kV DC or 4.2 kV AC p-p, must be derated at higher frequencies |
| Input impedance | 10 MΩ plus 2.0 to 2.8 pF, depending on cable length and scope input capacitance |
| Compensation range | 15-55 pF |
