TDS1012: Difference between revisions
Jump to navigation
Jump to search
(Created page with "<gallery> Tek tds 1012 1.jpg Tek tds 1012 2.jpg Tek tds 1012 3.jpg Tek tds 1012 4.jpg </gallery>") |
No edit summary |
||
| (31 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | |||
|manufacturer=Tektronix | |||
|series=TDS series scopes | |||
|model=TDS1012 | |||
|summary=100 MHz 2-channel digital storage scope | |||
|image=TDS1012_Waveform_image.jpg | |||
|caption=Tektronix TDS1012 | |||
|introduced=2005 | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [[Media:071-1064-00.pdf|TDS1000 and TDS2000 Series user manual]] (OCR) | |||
* [[Media:071-1064-00_TDS1000_and_TDS2000-Series_User_Manual_Revision_A.pdf| 071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A]] | |||
* [[Media:071-1076-02_TDS1000_and_TDS2000-Series_Service_Manual.pdf| 071-1076-02 TDS1000 and TDS2000-Series Service Manual]] | |||
* [[Media:077-0444-01_TDS1000, & TDS2000-Series_Programmer_Manual.pdf| 077-0444-01 TDS1000, & TDS2000-Series Programmer Manual]] | |||
* [[Media:3GW_15314_6_TDS1000 and TDS2000 Series Oscilloscopes_Datasheet.pdf| TDS1000 and TDS2000 Series Oscilloscopes Datasheet]] | |||
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] | |||
}} | |||
The '''Tektronix TDS1012''' is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen. An External trigger input on front, and the rear mounted optional TDS2MEM Communication Module provides a CompactFlash card slot, Centronics-type printer port, RS-232, and GPIB rear ports for convenient inter-connectivity. | |||
Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal. | |||
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video ([[NTSC]], [[PAL]], [[SECAM]]), and pulse width (or glitch) triggering on CH1, CH2, Ext and AC Line sources. | |||
{{BeginSpecs}} | |||
{{Spec | Bandwidth | 100 MHz (20 MHz at 2 mV/div) }} | |||
{{Spec | Vertical Sensitivity| 2 mV to 5 V/div with calibrated fine adjustment }} | |||
{{Spec | Time Base Range| 5 ns to 50 s/div }} | |||
{{Spec | Sample Rate| 1.0 GS/s on each channel }} | |||
{{Spec | Record Length| 2.5 K points }} | |||
{{Spec | Automatic Waveform Measurements| Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS }} | |||
{{Spec | Waveform Processing| Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) }} | |||
{{Spec | Autoset Menu| Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number }} | |||
{{EndSpecs}} | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Tek tds 1012 1.jpg | Tek tds 1012 1.jpg | ||
| Line 5: | Line 41: | ||
Tek tds 1012 4.jpg | Tek tds 1012 4.jpg | ||
</gallery> | </gallery> | ||
[[Category:TDS1000 series scopes]] | |||
Latest revision as of 05:39, 7 February 2024
The Tektronix TDS1012 is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen. An External trigger input on front, and the rear mounted optional TDS2MEM Communication Module provides a CompactFlash card slot, Centronics-type printer port, RS-232, and GPIB rear ports for convenient inter-connectivity.
Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and pulse width (or glitch) triggering on CH1, CH2, Ext and AC Line sources.
Key Specifications
| Bandwidth | 100 MHz (20 MHz at 2 mV/div) |
|---|---|
| Vertical Sensitivity | 2 mV to 5 V/div with calibrated fine adjustment |
| Time Base Range | 5 ns to 50 s/div |
| Sample Rate | 1.0 GS/s on each channel |
| Record Length | 2.5 K points |
| Automatic Waveform Measurements | Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS |
| Waveform Processing | Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) |
| Autoset Menu | Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number |
