4CX250F: Difference between revisions

Latest revision as of 08:51, 2 October 2024

The 4CX250F (7204) (P/N 154-0300-00) is a beam power tetrode vacuum tube designed to operate up to 500 MHz with plate voltage up to 2000 V.

It was originally designed as an RF power amplifier tube for transmitters and requires forced air cooling.

The 4CX250F is the same as the 4CX250B (7203), but with a 26.5 V filament instead of a 6 V filament.

The 4CX250F is used in the sweep circuit of the 519.

@@ Line 1: / Line 1: @@
-The '''4CX250F''' (7204) is a beam power tube designed to operate up to 500 MHz with plate voltage up to 2000 V.
+{{Vacuum Tube
+|Type=Tetrode
+|Number=4CX250F (7204)
+|EuroNumber=
+|RussianNumber=
+|Part_nos=154-0300-00
+|Description=beam power tetrode
+|Used_in=519;
+|Designers=
+}} designed to operate up to 500 MHz with plate voltage up to 2000 V.
 It was originally designed as an RF power amplifier tube for transmitters and requires forced air cooling.
@@ Line 6: / Line 16: @@
 ==Data sheets==
-* [http://w140.com/4cx250f.pdf RCA 4CX250F Datasheet (PDF)]
+* [[Media:RCA 4CX250F datasheet.pdf|RCA 4CX250F datasheet]] / [[Media:RCA 4CX250B datasheet.pdf|RCA 4CX250B datasheet]]
-* [http://w140.com/4cx250b.pdf RCA 4CX250B Datasheet (PDF)]
+* [[Media:Eimac 4CX250B datasheet.pdf|Eimac 4CX250B / 4CF250FG / 7203 / 8621 datasheet Rev 1979]] / [[Media:Eimac 7203 datasheet.pdf|Eimac 4CX250B / 4CF250FG / 7203 / 8621 datasheet Rev 1974]] /
+* [[tube:4cx250f|4CX250F]] / [[tube:4cx250b|4CX250B]] @ radiomuseum.org
 ==Used in==
@@ Line 16: / Line 27: @@
 Eimac 4cx250f 1.jpg|Eimac 4CX250F
 Eimac 4cx250f 2.jpg|Eimac 4CX250F
-Eimac 7203.jpg|Eimac 7203
+Eimac 7203.jpg     |Eimac 7203
+Tek-519_timebase_gen.png|Tek 519 Timebase Circuit using 4CX250F (V331)
 </gallery>
 [[Category:Pentodes]]