TDS2002: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | | {{Oscilloscope Sidebar | ||
|manufacturer=Tektronix | |||
summary=Digital Storage 60 MHz 2-channel scope | | |series=TDS series scopes | ||
image=TDS2002_Waveform_image.jpg | | |model=TDS2002 | ||
caption=Tektronix TDS2002 | | |summary=Digital Storage 60 MHz 2-channel scope | ||
introduced=2005 | | |image=TDS2002_Waveform_image.jpg | ||
discontinued=(?) | | |caption=Tektronix TDS2002 | ||
manuals= | |introduced=2005 | ||
* [[Media:071-1064-00.pdf|TDS1000 and TDS2000 Series user manual]] ( | |discontinued=(?) | ||
* [[Media:071-1064-00_TDS1000_and_TDS2000-Series_User_Manual_Revision_A.pdf| 071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A]] | |designers= | ||
* [[Media:071-1076-02_TDS1000_and_TDS2000-Series_Service_Manual.pdf| 071-1076-02 TDS1000 and TDS2000-Series Service Manual]] | |manuals= | ||
* [[Media:077-0444-01_TDS1000, & TDS2000-Series_Programmer_Manual.pdf| 077-0444-01 TDS1000, & TDS2000-Series Programmer Manual]] | * [[Media:071-1064-00.pdf|TDS1000 and TDS2000 Series user manual]] (OCR) | ||
* [[Media:3GW_15314_6_TDS1000 and TDS2000 Series Oscilloscopes_Datasheet.pdf| TDS1000 and TDS2000 Series Oscilloscopes Datasheet]] | * [[Media:071-1064-00_TDS1000_and_TDS2000-Series_User_Manual_Revision_A.pdf| 071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A]] | ||
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] | * [[Media:071-1076-02_TDS1000_and_TDS2000-Series_Service_Manual.pdf| 071-1076-02 TDS1000 and TDS2000-Series Service Manual]] | ||
* [[Media:077-0444-01_TDS1000, & TDS2000-Series_Programmer_Manual.pdf| 077-0444-01 TDS1000, & TDS2000-Series Programmer Manual]] | |||
* [[Media:3GW_15314_6_TDS1000 and TDS2000 Series Oscilloscopes_Datasheet.pdf| TDS1000 and TDS2000 Series Oscilloscopes Datasheet]] | |||
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] | |||
}} | }} | ||
The '''Tektronix TDS2002''' is a dual-channel, 60 MHz, 1 GS/s digital scope with a color LCD screen. | The '''Tektronix TDS2002''' is a dual-channel, 60 MHz, 1 GS/s digital scope with a color LCD screen. | ||
An optional rear-mounted [[TDS2MEM]] Communication Module provides a CompactFlash card slot, [[GPIB]], [[RS-232]], and Centronics-type [[parallel printer interface]]s. | |||
The MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal. | |||
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources. | Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Bandwidth | {{Spec | Bandwidth | 60 MHz (20 MHz at 2 mV/div) }} | ||
{{Spec | Vertical Sensitivity| 2 mV to 5 V/div with calibrated fine adjustment }} | {{Spec | Vertical Sensitivity| 2 mV to 5 V/div with calibrated fine adjustment }} | ||
{{Spec | | {{Spec | Timebase | 5 ns to 50 s/div }} | ||
{{Spec | Sample Rate| 1.0 GS/s on each channel }} | {{Spec | Sample Rate| 1.0 GS/s on each channel }} | ||
{{Spec | Record Length| 2.5 K points }} | {{Spec | Record Length| 2.5 K points }} | ||
| Line 43: | Line 46: | ||
[[Category: | [[Category:TDS2000 series scopes]] | ||
Latest revision as of 05:39, 7 February 2024
The Tektronix TDS2002 is a dual-channel, 60 MHz, 1 GS/s digital scope with a color LCD screen.
An optional rear-mounted TDS2MEM Communication Module provides a CompactFlash card slot, GPIB, RS-232, and Centronics-type parallel printer interfaces.
The MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.
Key Specifications
| Bandwidth | 60 MHz (20 MHz at 2 mV/div) |
|---|---|
| Vertical Sensitivity | 2 mV to 5 V/div with calibrated fine adjustment |
| Timebase | 5 ns to 50 s/div |
| Sample Rate | 1.0 GS/s on each channel |
| Record Length | 2.5 K points |
| Automatic Waveform Measurements | Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS |
| Waveform Processing | Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) |
| Autoset Menu | Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number |
