067-0066-00: Difference between revisions
No edit summary |
m (Capitolize sidebar summary) |
||
Line 3: | Line 3: | ||
|series=661 | |series=661 | ||
|type=067-0066-00 | |type=067-0066-00 | ||
|summary=Calibration | |summary=Calibration Fixture | ||
|image=Tek 661 vertical test load unit 1.jpg | |image=Tek 661 vertical test load unit 1.jpg | ||
|caption=Tek 661 Vertical Test Load Unit | |caption=Tek 661 Vertical Test Load Unit |
Latest revision as of 20:30, 15 November 2023
The Tektronix 067-0066-00 is a pair of calibration fixtures for the 661 oscilloscope, one "Sweep Test Load Unit" and one "Vertical Test Load Unit".
The Vertical Test Load Unit serves a similar purpose to the TU-4 (for the 560-series) and 1M1 (for the 500-series), for testing the power supplies and interconnections.
It contains load resistors for testing the mainframe's power supply, as well as a switch for testing the wiring between the plug-in interface and the multi-pin digital output connector on the rear of the 661 mainframe. There is a banana connector on the front of the plug-in that is wired to the +300 V pin on the interface connector via a fuse.
The Sweep Test Load Unit has a UHF connector for an external 150 V sawtooth signal to check the sweep. please expand
Key Specifications
- please add