PS501: Difference between revisions

Line 6:

* [[Media:PS501-1_MOD_730E.pdf|PS501-1 MOD 730E Transducer Power Supply Modification Manual]]

* [[Media:PS501-1_MOD_730EF.pdf|PS501-1 MOD 730E Transducer and MOD 730F RFG Power Supply Modification Manual]]

* [[Media:Tek ps501 mods 730E and 7030F.pdf|Tektronix PS501-1 Mods 703E and 703F ~~(PDF)~~]]

* [[Media:Tek ps501 mods 730E and 7030F.pdf|Tektronix PS501-1 Mods 703E and 703F]]

</small>

}}

~~The 0–20 V / 400 mA output is floating, the fixed 5 V / 1 A output is ground referenced.~~

There are three versions:

* '''PS501''' has coarse/fine potentiometers for setting the variable output voltage.

~~The~~ PS501 ~~and PS501-2 have~~ coarse/fine potentiometers for setting the variable output voltage.

* '''PS501-1''' has a 0–10/10–20 V switch and a 10-turn pot with mechanical voltage readout.

* '''PS501-2''' has coarse/fine potentiometers, and additionally features an analog meter to monitor voltage or current.

~~The '''PS501-2''' additionally features an analog meter to monitor voltage or current.~~

~~The~~ '''PS501-1''' has a 0–10/10–20 V switch and a 10-turn pot with mechanical voltage readout.

All versions have a 0–400 mA current limiting pot and an output switch.

The 0–20 V / 400 mA output is floating, the fixed 5 V / 1 A output is ground referenced.

Two special modified versions of the PS501-1 exist:

'''PS501-1 MOD 730E''' is a modified version to power the strain gage adapter [[015-0169-00]] or other transducers.

* '''PS501-1 MOD 730E''' is a modified version to power the strain gage adapter [[015-0169-00]] or other transducers. The strain gage adapter was initially powered by the [[3A10]] differential plug in for the [[561]] or [[564]] oscilloscopes. When the production of this oscilloscope series was terminated in 1975, the modified PS501-1 MOD 730E became available in 1977 as a replacement power supply, and was produced until 1985.

The strain gage adapter was initially powered by the [[3A10]] differential plug in for the [[561]] or [[564]] oscilloscopes. When the production of this oscilloscope series was terminated in 1975, the modified PS501-1 MOD 730E

* '''PS501-1 MOD 730F''' is a modified version to provide power for the 015-0108-01 Rotational Function Generator (RFG) and to condition its output signals to be connected to the modified [[7B53A]] MOD FB time base. The RFG is described in the [[Engine Analyzer]] manual with schematics. <br />The [[3A74]] MOD 730A vertical amplifier and [[2B67]] MOD 730A time base were originally used in a [[561]] or [[564]] oscilloscope as part of the Tektronix [[Engine Analyzer]] System. When the production of this oscilloscope series was terminated, the modified PS501-1 MOD 730F became available as a functional replacement for generating the horizontal signals for the gated X-Y display of the [[7B53A]] MOD FB timebase. The [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook ]] has descriptions of the available tranducres and components, which before were described in the [[3A10]] manual.

became available in 1977 as a replacement power supply, and was produced until 1985.

'''PS501-1 MOD 730F''' is a modified version to provide power for the 015-0108-01 Rotational Function Generator (RFG)

and to condition its output signals to be connected to the modified [[7B53A]] MOD FB time base. The RFG is described in the [[Engine Analyzer]] manual with schematics.

The [[3A74]] MOD 730A vertical amplifier and [[2B67]] MOD 730A time base were originally used in a [[561]] or [[564]]

oscilloscope as part of the Tektronix [[Engine Analyzer]] System. When the production of this oscilloscope series

was terminated, the modified PS501-1 MOD 730F became available as a functional replacement for generating

the horizontal signals for the gated X-Y display of the [[7B53A]] MOD FB timebase. The [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook ]] has descriptions of the available tranducres and components, which before were described in the [[3A10]] manual.

@@ Line 6: / Line 6: @@
 * [[Media:PS501-1_MOD_730E.pdf|PS501-1 MOD 730E Transducer Power Supply Modification Manual]]
 * [[Media:PS501-1_MOD_730EF.pdf|PS501-1 MOD 730E Transducer and MOD 730F RFG Power Supply Modification Manual]]
-* [[Media:Tek ps501 mods 730E and 7030F.pdf|Tektronix PS501-1 Mods 703E and 703F (PDF)]]
+* [[Media:Tek ps501 mods 730E and 7030F.pdf|Tektronix PS501-1 Mods 703E and 703F]]
 </small>
 }}
-The 0–20 V / 400 mA output is floating, the fixed 5 V / 1 A output is ground referenced.
+There are three versions:
+* '''PS501''' has coarse/fine potentiometers for setting the variable output voltage.
-The PS501 and PS501-2 have coarse/fine potentiometers for setting the variable output voltage.
+* '''PS501-1''' has a 0–10/10–20 V switch and a 10-turn pot with mechanical voltage readout.
+* '''PS501-2''' has coarse/fine potentiometers, and additionally features an analog meter to monitor voltage or current.
-The '''PS501-2''' additionally features an analog meter to monitor voltage or current.
-The '''PS501-1''' has a 0–10/10–20 V switch and a 10-turn pot with mechanical voltage readout.
 All versions have a 0–400 mA current limiting pot and an output switch.
+The 0–20 V / 400 mA output is floating, the fixed 5 V / 1 A output is ground referenced.
 Two special modified versions of the PS501-1 exist:
-'''PS501-1 MOD 730E''' is a modified version to power the strain gage adapter [[015-0169-00]] or other transducers.
+* '''PS501-1 MOD 730E''' is a modified version to power the strain gage adapter [[015-0169-00]] or other transducers. The strain gage adapter was initially powered by the [[3A10]] differential plug in for the [[561]] or [[564]] oscilloscopes. When the production of this oscilloscope series was terminated in 1975, the modified PS501-1 MOD 730E became available in 1977 as a replacement power supply, and was produced until 1985.
-The strain gage adapter was initially powered by the [[3A10]] differential plug in for the [[561]] or [[564]] oscilloscopes. When the production of this oscilloscope series was terminated in 1975, the modified PS501-1 MOD 730E
+* '''PS501-1 MOD 730F''' is a modified version to provide power for the 015-0108-01 Rotational Function Generator (RFG) and to condition its output signals to be connected to the modified [[7B53A]] MOD FB time base. The RFG is described in the [[Engine Analyzer]] manual with schematics. <br />The [[3A74]] MOD 730A vertical amplifier and [[2B67]] MOD 730A time base were originally used in a [[561]] or [[564]] oscilloscope as part of the Tektronix [[Engine Analyzer]] System. When the production of this oscilloscope series was terminated, the modified PS501-1 MOD 730F became available as a functional replacement for generating the horizontal signals for the gated X-Y display of the [[7B53A]] MOD FB timebase. The [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook ]] has descriptions of the available tranducres and components, which before were described in the [[3A10]] manual.
-became available in 1977 as a replacement power supply, and was produced until 1985.
-'''PS501-1 MOD 730F''' is a modified version to provide power for the 015-0108-01 Rotational Function Generator (RFG)
-and to condition its output signals to be connected to the modified [[7B53A]] MOD FB time base. The RFG is described in the [[Engine Analyzer]] manual with schematics.
-The [[3A74]] MOD 730A vertical amplifier and [[2B67]] MOD 730A time base were originally used in a [[561]] or [[564]]
-oscilloscope as part of the Tektronix [[Engine Analyzer]] System. When the production of this oscilloscope series
-was terminated, the modified PS501-1 MOD 730F became available as a functional replacement for generating
-the horizontal signals for the gated X-Y display of the [[7B53A]] MOD FB timebase. The [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook ]] has descriptions of the available tranducres and components, which before were described in the [[3A10]] manual.
 {{MissingSpecs}}

PS501: Difference between revisions

Navigation menu