134/Repairs: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| Line 3: | Line 3: | ||
In both cases, it would be tempting to replace the OE supply with a modern wall wart and suitable barrel connector. One problem with this is that there is no room inside a Type 134 for the inner workings of a panel mount barrel receptacle. In addition, I've failed to find a suitable 19-20 VDC wall wart. While 19 V<sub>DC</sub> is common for laptop supplies, those are all rated for much higher currents and are much larger than necessary. | In both cases, it would be tempting to replace the OE supply with a modern wall wart and suitable barrel connector. One problem with this is that there is no room inside a Type 134 for the inner workings of a panel mount barrel receptacle. In addition, I've failed to find a suitable 19-20 VDC wall wart. While 19 V<sub>DC</sub> is common for laptop supplies, those are all rated for much higher currents and are much larger than necessary. | ||
If a good wall wart and a suitable barrel receptacle could be found, it would be easy to make this into a supply that worked with both 131s and 134s. | If a good wall wart, with isolated output, and a suitable inline barrel receptacle could be found, it would be easy to make this into a supply that worked with both 131s and 134s. | ||