TDS1012: Difference between revisions

TDS1012 (view source)

45 bytes removed , 8 May 2020

no edit summary

36,756

edits

Revision as of 03:01, 22 July 2019 (view source) Peter (talk \| contribs) No edit summary ← Older edit		Revision as of 03:32, 8 May 2020 (view source) Peter (talk \| contribs) No edit summary Newer edit →
Line 18:		Line 18:
	Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.		Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.

	Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video ([[~~wikipedia:NTSC\|~~NTSC]], [[~~wikipedia:PAL\|~~PAL]], [[~~wikipedia:SECAM\|~~SECAM]]), and pulse width (or glitch) triggering on CH1, CH2, Ext and AC Line sources.		Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video ([[NTSC]], [[PAL]], [[SECAM]]), and pulse width (or glitch) triggering on CH1, CH2, Ext and AC Line sources.