2755: Difference between revisions

2755 (view source)

Revision as of 11:55, 18 December 2023

723 bytes removed , 18 December 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

37,229

edits

@@ Line 24: / Line 24: @@
 {{BeginSpecs}}
-{{Spec | Frequency |
+{{Spec | Frequency |  10 kHz to 21 GHz, up to 325 GHz with external waveguide mixers }}
-* Coaxial Input Bands: 10 kHz to 21 GHz
-* External Waveguide mixers: 18 kHz to 325 GHz }}
 {{Spec | Frequency Span  | 100 Hz/div to 10 GHz/div in 1-2-5 sequence (plus 0 Hz and MAX) }}
 {{Spec | Resolution Bandwidth | 6 dB bandwidths from 100 Hz to 3 MHz in decade steps }}
@@ Line 43: / Line 41: @@
 {{Spec | Display Dynamic Range | 90 dB }}
 {{Spec | Dynamic Range (Compression to noise) | 134 dBm }}
-{{Spec | Calibrator (Cal out) | 50Ω, -20 dBm ±0.3 dB at 100 MHz }}
+{{Spec | Calibrator (Cal out) | 50 Ω, -20 dBm ±0.3 dB at 100 MHz }}
-{{Spec | Included Accessories |Operator’s Manual; Programmer’s Manual; 6-ft, 50Ω coaxial cable, N-N; 18-inch, 50Ω coaxial cable, BNC-BNC; N male to BNC female adapter; rear connector shield; power cord, power cord clamp, and spare fuses; CRT filter set consisting of amber and gray light filters plus mesh filter }}
+CRT filter set consisting of amber and gray light filters plus mesh filter }}
 {{Spec | Weight | 27 kg (60 lbs) }}
 {{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 448 Hz; 180 – 250 V<sub>AC</sub>, 48 to 72 Hz.  At 115 V<sub>AC</sub>, 60 Hz, 210 W max with all options }}
-{{Spec | Operating Atmospherics | Temperatures: 0 °C to +50 °C; Humidity: 95% below +30 °C, 75% above +30 °C, 45% above +40 °C; Altitude: Up to 3 km (10,000 ft) }}
-{{Spec | GPIB Characteristics | P Version: In accordance with IEEE Standard 488-1978 implemented as SH1, AH1, T5, L3, SR1, RL1, PP1, DC1, DT1, and C0; Non-P Version (Plotter Output): Implemented as SH1, AH0, T3, L0, SR0, RL0, PP0, DC0, DT0, and C0 }}
 {{EndSpecs}}
-==Options==
+</small>
+'''Options'''
 * Opt. 01: Add preselector for the 1.7 to 21 GHz band and limiter for 1st mixer below 1.8 GHz
-* Opt. 07: 75Ω dBmV input and calibration in addition to 50Ω dBm input and calibration; Includes BNC male to female adapter connector, 42 inch BNC to BNC connector 75Ω coax cable
+* Opt. 07: 75 Ω dBmV input and calibration in addition to 50Ω dBm input and calibration; Includes BNC male to female adapter connector, 42 inch BNC to BNC connector 75Ω coax cable
 * Opt. 21: High Performance 18 to 40 GHz Waveguide Mixer Set includes two mixers (18 to 26.5 GHz, and 26.5 GHz to 40 GHz)
 * Opt. 22: High Performance 18 to 60 GHz Waveguide Mixer Set includes three mixers (18 to 26.5 GHz, 26.5 GHz to 40 GHz, and 40 GHz to 60 GHz)
@@ Line 67: / Line 63: @@
 * Opt. 42: Replaces MARKER/VIDEO input port on the rear panel with a 110 MHz IF output port that provides a 3 dB signal bandwidth ≥4.5 MHz
 * Opt. 45: MATE/CIIL language
-* Opt. 52: North American 220V configuration with standard power cord.  Fuses are replaced with 2 A slo-blo
+</small>
 ==Pictures==
@@ Line 73: / Line 69: @@
 Tek_2755P_Waveform_image.jpg
 Tek_2755_2.jpg
+Tektronix 2755AP.jpg  | courtesy of wellenkino.de
 </gallery>
 [[Category:Spectrum analyzers]]