7D13: Difference between revisions
mNo edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
==Internals== | ==Internals== | ||
The 7D13 consists of an analog pulse width modulator front-end built with 741 op amps and dual FETs, and a 3½ digit counter section using standard 74xx TTL parts which is interfacing with the [[7000 series readout system|readout system]]. The front end is isolated by transformers used for pulses and a floating ±15 V supply. | The 7D13 consists of an analog pulse width modulator front-end built with 741 op amps and dual FETs, and a 3½ digit counter section using standard 74xx TTL parts which is interfacing with the [[7000 series readout system|readout system]] (through a [[155-0038-00]] D/A converter). The front end is isolated by transformers used for pulses and a floating ±15 V supply. | ||
The Probe jack for the P6058 has contacts for the temperature sensor (a diode-connected transistor) as well as the voltage input terminals. | The Probe jack for the P6058 has contacts for the temperature sensor (a diode-connected transistor) as well as the voltage input terminals. | ||
Revision as of 11:59, 24 April 2015
Template:Plugin Sidebar 2 The Tektronix 7D13 is a digital multimeter plug-in for 7000-series scopes with CRT readout. It will function in any compartment. The input section is galvanically isolated, allowing the input to float ±1500 volts with respect to chassis ground.
Key Specifications
| Functions | DC Volts, DC Current, Resistance, Temperature |
|---|---|
| Voltage Ranges | 1.999 V, 19.99 V, 199.9 V, 1000 V |
| Input impedance | 10 MΩ |
| Current ranges | 1.999 mA, 19.99 mA, 199.9 mA, 1999 mA |
| Resistance ranges | 199.9 Ω, 1999 Ω, 19.99 kΩ, 199.9 kΩ, 1999 kΩ |
| Temperature | -55 °C to +125 °C, requires P6058 voltage/temperature probe |
Internals
The 7D13 consists of an analog pulse width modulator front-end built with 741 op amps and dual FETs, and a 3½ digit counter section using standard 74xx TTL parts which is interfacing with the readout system (through a 155-0038-00 D/A converter). The front end is isolated by transformers used for pulses and a floating ±15 V supply. The Probe jack for the P6058 has contacts for the temperature sensor (a diode-connected transistor) as well as the voltage input terminals.
Links
Pictures
-
-
from manual
