26G2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix 26G2 is a ramp generator plug-in for the [[:Category:2600 series scopes|2600 series]] mainframes. | The Tektronix 26G2 is a ramp generator plug-in for the [[:Category:2600 series scopes|2600 series]] mainframes. | ||
It generates ramps with duration ranging from | |||
It generates ramps with duration ranging from 10 μs to 10 seconds. | |||
There are outputs with different combinations of amplitude and output impedance. | There are outputs with different combinations of amplitude and output impedance. | ||
The | The 10 V output has very low output impedance (due to negative feedback) and has | ||
current limiting circuit that limits it to about | current limiting circuit that limits it to about 33 mA.The 1 V output has an | ||
output impedance of | output impedance of 50 Ω, resistive. | ||
The 26G2 uses a [[155-0029-01]] as the trigger circuit, | The 26G2 uses a [[155-0029-01]] as the trigger circuit, | ||
Revision as of 07:08, 10 September 2016
The Tektronix 26G2 is a ramp generator plug-in for the 2600 series mainframes.
It generates ramps with duration ranging from 10 μs to 10 seconds. There are outputs with different combinations of amplitude and output impedance. The 10 V output has very low output impedance (due to negative feedback) and has current limiting circuit that limits it to about 33 mA.The 1 V output has an output impedance of 50 Ω, resistive.
The 26G2 uses a 155-0029-01 as the trigger circuit, and a 155-0028-00 miller integrator chip to generate the ramp. Discrete bipolar transistors are used for the output amplifiers.
-
26G2
