P6056: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
Its sister model [[P6057]] has ×100 attenuation. | Its sister model [[P6057]] has ×100 attenuation. | ||
<tt> | |||
<u>WARNING</u>: | |||
This high performance device has a fragile resistor assembly in the | |||
probe head, subject to failure in rough usage. Use with slip-on tip | |||
whenever possible. One replacement part is provided with the package. | |||
Contact nearest Field Office for additional parts (P/N 307-0330-00), if | |||
required. For replacement and Calibration Procedure, refer to Pg. 3 & 4 | |||
of manual. | |||
</tt> | |||
==Manual== | ==Manual== | ||
Revision as of 12:51, 5 August 2015
The Tektronix P6056 is a 3.5 GHz ×10 probe for 50 Ω-input scopes, released along with the 7A19 amplifier in 1972.
It has an Identify switch and readout contact.
Its sister model P6057 has ×100 attenuation.
WARNING:
This high performance device has a fragile resistor assembly in the
probe head, subject to failure in rough usage. Use with slip-on tip
whenever possible. One replacement part is provided with the package.
Contact nearest Field Office for additional parts (P/N 307-0330-00), if
required. For replacement and Calibration Procedure, refer to Pg. 3 & 4
of manual.
Manual
Specifications
- Bandwidth : DC to 3.5 GHz
- Rise time : 100 ps
- Attenuation : 10x
- Input Resistance : 5 kΩ
- Input Capacitance : approx. 1 pF
- Scope Input : 50Ω
- Features: Readout Pin, ID Button