FG502: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
* [http://w140.com/smb/FG502_SM.pdf Tektronix FG502 Manual (OCR, PDF)] | * [http://w140.com/smb/FG502_SM.pdf Tektronix FG502 Manual (OCR, PDF)] | ||
}} | }} | ||
It generates low distortion sine, square, triangle, | It generates low distortion sine, square, triangle, positive and negative pulse, and ramp waveforms | ||
positive and negative pulse, and ramp waveforms | |||
from 0.1 Hz to 11 MHz. | from 0.1 Hz to 11 MHz. | ||
A squarewave trigger is available at the front panel. | A squarewave trigger is available at the front panel. Variable DC offset is also provided. | ||
Variable DC offset is also provided. | |||
Α voltage-controlled frequency (VCF) input controls | Α voltage-controlled frequency (VCF) input controls the output frequency from an external voltage source. | ||
the output frequency from an external voltage source. | The output frequency can be swept above or below the selected frequency to maximum of 1000:1 depending on | ||
The output frequency can be swept above or below the | the polarity and amplitude of the VCF input and the selected output frequency. | ||
selected frequency to maximum of 1000:1 depending on | |||
the polarity and amplitude of the VCF input and the | |||
selected output frequency. | |||
An external gate input allows the generator to operate | An external gate input allows the generator to operate for the duration of an externally applied gating signal. | ||
for the duration of an externally applied gating signal. | This mode provides either a single cycle output, or a train of preselected waveforms, | ||
This mode provides either a single cycle output, | depending on the gating signal width and the generator frequency setting. | ||
or a train of preselected waveforms, | |||
depending on the gating signal width | |||
and the generator frequency setting. | |||
{{MissingSpecs}} | {{MissingSpecs}} | ||
==Links== | |||
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_500/Reparatur%20Tektronix%20FG502-1-com.pdf FG502 repair report @ amplifier.cd] (German) | |||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
Tek fg502 beat-up.jpg | |||
Tek fg502 2.jpg | Tek fg502 2.jpg | ||
Tek fg502 34.jpg | Tek fg502 34.jpg | ||
Revision as of 02:11, 15 April 2017
The Tektronix FG502 is a function generator plug-in for the TM500 system.
It generates low distortion sine, square, triangle, positive and negative pulse, and ramp waveforms from 0.1 Hz to 11 MHz.
A squarewave trigger is available at the front panel. Variable DC offset is also provided.
Α voltage-controlled frequency (VCF) input controls the output frequency from an external voltage source. The output frequency can be swept above or below the selected frequency to maximum of 1000:1 depending on the polarity and amplitude of the VCF input and the selected output frequency.
An external gate input allows the generator to operate for the duration of an externally applied gating signal. This mode provides either a single cycle output, or a train of preselected waveforms, depending on the gating signal width and the generator frequency setting.
Key Specifications
- please add
Links
- FG502 repair report @ amplifier.cd (German)
Pictures
-
-
-
-
right internal view
-
left internal view
-
rear view
