FG502: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{TM500 | mfg=Tektronix | type=FG502 | function=function generator | class=function generator | image=Tek fg502 beat-up.jpg | introduced=1974 | discontinued=1993 |
{{TM500 | mfg=Tektronix | type=FG502 | function=function generator | class=function generator | image=Tek_fg502_2.jpg | introduced=1974 | discontinued=1993 |
manuals=
manuals=
* [http://w140.com/smb/FG502_SM.pdf Tektronix FG502 Manual (OCR, PDF)]
* [http://w140.com/smb/FG502_SM.pdf Tektronix FG502 Manual (OCR, PDF)]
Line 23: Line 23:
==Pictures==
==Pictures==
<gallery>
<gallery>
Tek fg502 2.jpg
Tek fg502 beat-up.jpg
Tek fg502 beat-up.jpg
Tek fg502 2.jpg
Tek fg502 34.jpg
Tek fg502 34.jpg
Tek fg502 right internal.jpg|right internal view
Tek fg502 right internal.jpg|right internal view

Revision as of 01:48, 28 November 2018

Tektronix FG502
function generator
Tektronix FG502

Produced from 1974 to 1993

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix FG502 is a function generator plug-in for the TM500 system.

It generates low distortion sine, square, triangle, positive and negative pulse, and ramp waveforms from 0.1 Hz to 11 MHz.

A squarewave trigger is available at the front panel. Variable DC offset is also provided.

Α voltage-controlled frequency (VCF) input controls the output frequency from an external voltage source. The output frequency can be swept above or below the selected frequency to maximum of 1000:1 depending on the polarity and amplitude of the VCF input and the selected output frequency.

An external gate input allows the generator to operate for the duration of an externally applied gating signal. This mode provides either a single cycle output, or a train of preselected waveforms, depending on the gating signal width and the generator frequency setting.

Key Specifications

  • please add

Links

Pictures