390AD: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix 390AD is a digitizer with a 15 MHz bandwidth and a GPIB interface. | The '''Tektronix 390AD''' is a digitizer with a 15 MHz bandwidth and a GPIB interface. | ||
==Specifications== | |||
It can digitize two channels at up to 30 megasamples oer second | It can digitize two channels at up to 30 megasamples oer second | ||
or one channel at up to 60 megasamples per second. | or one channel at up to 60 megasamples per second. | ||
It has 10 bits of voltage resolution. | It has 10 bits of voltage resolution. | ||
Dynamic accuracy is 8.5 bits up to 1 MHz and 7.5 bits up to 10 MHz. | Dynamic accuracy is 8.5 bits up to 1 MHz and 7.5 bits up to 10 MHz. | ||
The memory is 4096 samples, which can be used for digitizing a single | The memory is 4096 samples, which can be used for digitizing a single | ||
waveform or for two waveforms at 2048 samples each. | waveform or for two waveforms at 2048 samples each. | ||
The 390AD has a "Rate Switching" feature where it starts an acquisition | The 390AD has a "Rate Switching" feature where it starts an acquisition | ||
at one sample rate, and then switches to a second sample rate. | at one sample rate, and then switches to a second sample rate. | ||
The 390AD can be set to trigger from either of the two vertical signals | The 390AD can be set to trigger from either of the two vertical signals | ||
or from an external trigger signal. | or from an external trigger signal. | ||
The signals acquired on a 390AD can be exported via GPIB or displayed | The signals acquired on a 390AD can be exported via GPIB or displayed | ||
on an external CRT ([[624|Tek 624]] is recommended) in X-Y mode. | on an external CRT ([[624|Tek 624]] is recommended) in X-Y mode. | ||
==Links== | |||
* [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/390AD.html Tek 390AD @ amplifier.cd] | |||
[[list of manuals that are needed|Service manual needed]]. | ==Manuals== | ||
* [[list of manuals that are needed|Service manual needed]] | |||
* [http://w140.com/tek_390_op.pdf Tektronix 390AD Operators Manual (PDF)] | |||
{{MissingPics}} | |||
[[Category:Digital storage scopes]] | [[Category:Digital storage scopes]] | ||
Revision as of 11:00, 8 May 2017
The Tektronix 390AD is a digitizer with a 15 MHz bandwidth and a GPIB interface.
Specifications
It can digitize two channels at up to 30 megasamples oer second or one channel at up to 60 megasamples per second. It has 10 bits of voltage resolution.
Dynamic accuracy is 8.5 bits up to 1 MHz and 7.5 bits up to 10 MHz. The memory is 4096 samples, which can be used for digitizing a single waveform or for two waveforms at 2048 samples each.
The 390AD has a "Rate Switching" feature where it starts an acquisition at one sample rate, and then switches to a second sample rate. The 390AD can be set to trigger from either of the two vertical signals or from an external trigger signal.
The signals acquired on a 390AD can be exported via GPIB or displayed on an external CRT (Tek 624 is recommended) in X-Y mode.
Links
Manuals
Pictures
- please add