T5191: Difference between revisions
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
519 crt defl.jpg | deflection trimmers | 519 crt defl.jpg | deflection trimmers | ||
Timkoeth 519 TWK 6448.jpg | screen mask with tube parameters | Timkoeth 519 TWK 6448.jpg | screen mask with tube parameters | ||
Tek 519 crt deflection1.jpg | |||
Tek 519 crt deflection2.jpg | |||
Tek 519 crt distributed deflection trim.jpg | |||
Tek 519 crt gun2.jpg | |||
Tek 519 crt gun5.jpg | |||
</gallery> | </gallery> | ||
[[Category:Cathode ray tubes]] | [[Category:Cathode ray tubes]] | ||
Revision as of 06:40, 25 May 2018
The Tektronix T5191 (part number 154-308 / 154-0308-00) is the CRT used in the 1 GHz Model 519 scope (serial numbers 1017 and up).
The usable screen area was 6 × 2 divisions. Total accelerating voltage in the 519 was 24 kV. The tube has 125 Ω GR-874 connectors for signal and termination connections to the distributed vertical deflection plates that consist of S-shaped striplines. These were individually tuned for optimum response on a time-domain reflectometer before the deflection system was inserted into the tube during manufacturing.
Each tube was individually characterized for rise time and deflection sensitivity. The precise values (on the order of 350 ps and 10 V/Div, respectively) were written on the CRT and on the CRT bezel.
-
-
-
-
deflection system
-
deflection trimmers
-
screen mask with tube parameters
-
-
-
-
-
