Я4С-102: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 40: Line 40:
Я4С-102_threequarter.jpg | Three-quarter view
Я4С-102_threequarter.jpg | Three-quarter view
Я4С-102_rear.jpg | Rear view
Я4С-102_rear.jpg | Rear view
Я4С-102_and_CSA803A.jpg | Я4С-102 with Tek CSA802A testing risetime
Я4С-102_and_CSA803A.jpg | Я4С-102 with Tek CSA803A testing risetime
Я4С-102_test_setup_detail.jpg | Detail of interconnections of Я4С-102 and CSA803A/SD24/SD22 sampling heads
Я4С-102_test_setup_detail.jpg | Detail of interconnections of Я4С-102 and CSA803A/SD24/SD22 sampling heads
Я4С-102_trigger_and_delayed_outputs.jpg | Trigger and delayed signal outputs
Я4С-102_trigger_and_delayed_outputs.jpg | Trigger and delayed signal outputs

Revision as of 07:06, 14 May 2018

Template:Plugin Sidebar 2

The Я4С-102 is a dual delay line plug-in for Soviet 7000-series clones. It is roughly analogous to the Tek 7M11.

Significant differences to the 7M11 include:

  • faster risetime spec (150ps instead of 175ps)
  • shorter delay (70ns instead of 75ns)
  • СР50-262 connectors instead of GR874
  • separate trigger outputs instead of switchable trigger output
  • trigger and signal outputs both attenuated 2:1

The signal inputs and outputs are СР50-262 type, which are similar to N connectors. N connectors will fit, just about, but the thread doesn't fully engage. The trigger outputs are СР50-73 type.

The sample in the photograph has a measured 125ps risetime, though with a couple of nanoseconds of 'sag' after the leading edge. This corresponds to a bandwidth of nearly 3GHz.

The plugin is extremely heavy at 3.7kg (8lb 2oz). It is entirely passive, having no edge connector on the rear, and can be used independently of the oscilloscope mainframe.

Key Specifications

Impedance 50 Ω
Delay time 70 ns
Signal risetime < 150 ps
Trigger risetime < 500 ps
Maximum input voltage 2V

Links

Pictures