560 Series plug-in interface: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 17: Line 17:
|  4 || bgcolor="LightGreen" | multi-trace sync pulse ||  50 Ω coax between slots, screen on right slot, center conductor on left slot   
|  4 || bgcolor="LightGreen" | multi-trace sync pulse ||  50 Ω coax between slots, screen on right slot, center conductor on left slot   
|-  
|-  
|  5 || bgcolor="Pink"      | ground return to PSU  ||   
|  5 || bgcolor="Pink"      | −12.2 V ground return ||   
|-  
|-  
|  6 || bgcolor="Pink"      | +420 V unreg. via 2 kΩ ||  from +300 V regulator input
|  6 || bgcolor="Pink"      | +420 V unreg. via 2 kΩ ||  from +300 V regulator input, regulator bypass resistor in plug-in to pin 10
|-  
|-  
|  7 || bgcolor="LightBlue"  | 117 V<sub>AC</sub>    ||  from mains transformer ''primary'' (power line)
|  7 || bgcolor="LightBlue"  | 117 V<sub>AC</sub>    ||  from mains transformer ''primary'' (power line)
Line 41: Line 41:
| 16 || bgcolor="Pink"      | −12.2 V reg.          ||   
| 16 || bgcolor="Pink"      | −12.2 V reg.          ||   
|-  
|-  
| 17 || bgcolor="Yellow"    | −deflection plate       ||  left H on right slot, lower V on left slot
| 17 || bgcolor="Yellow"    | −deflection plate     ||  left H on right slot, lower V on left slot
|-   
|-   
| 18 || bgcolor="LightGreen" | plug-in interconnect  ||  50 Ω coax between slots, center conductor
| 18 || bgcolor="LightGreen" | plug-in interconnect  ||  50 Ω coax between slots, center conductor
Line 47: Line 47:
| 19 || bgcolor="LightGreen" | plug-in interconnect  ||  50 Ω coax between slots, screen
| 19 || bgcolor="LightGreen" | plug-in interconnect  ||  50 Ω coax between slots, screen
|-   
|-   
| 20 || bgcolor="Pink"      | +210 V unreg. via 2 kΩ ||  from +125 V regulator input
| 20 || bgcolor="Pink"      | +210 V unreg. via 2 kΩ ||  from +125 V regulator input, regulator bypass resistor in plug-in to pin 15
|-  
|-  
| 21 || bgcolor="Yellow"    | +deflection plate       ||  right H on right slot, upper V on left slot
| 21 || bgcolor="Yellow"    | +deflection plate     ||  right H on right slot, upper V on left slot
|-  
|-  
| 22 || bgcolor="Pink"      | +75 V unreg. via 2 kΩ  ||  from −100 V regulator input
| 22 || bgcolor="Pink"      | +75 V unreg. via 2 kΩ  ||  from −100 V regulator input, regulator bypass resistor in plug-in to ground
|-  
|-  
| 23 || bgcolor="Pink"      | −100 V reg.            ||   
| 23 || bgcolor="Pink"      | −100 V reg.            ||   

Revision as of 04:08, 5 June 2018

click to enlarge

The plug-in interface of the 560-series scopes is a single 24-pin Amphenol connector per slot (horizontal/vertical).

Pin Function Comment
1 6.3 VAC 6 A capacity in 561, dedicated winding per slot
2 6.3 VAC return for pin 1
3 multi-trace sync pulse 50 Ω coax between slots, center conductor on right slot, screen on left slot
4 multi-trace sync pulse 50 Ω coax between slots, screen on right slot, center conductor on left slot
5 −12.2 V ground return
6 +420 V unreg. via 2 kΩ from +300 V regulator input, regulator bypass resistor in plug-in to pin 10
7 117 VAC from mains transformer primary (power line)
8 117 VAC return for pin 8
9 chassis ground
10 +300 V reg.
11 trigger signal out (V) to pin 12 on other slot
12 trigger signal in (H) from pin 11 on other slot
13 blanking to blanking deflection plate on CRT, 560 kΩ pull-up to 125 V in 561 (NC on left slot)
14 intensifying to CRT (NC on left slot)
15 +125 V reg.
16 −12.2 V reg.
17 −deflection plate left H on right slot, lower V on left slot
18 plug-in interconnect 50 Ω coax between slots, center conductor
19 plug-in interconnect 50 Ω coax between slots, screen
20 +210 V unreg. via 2 kΩ from +125 V regulator input, regulator bypass resistor in plug-in to pin 15
21 +deflection plate right H on right slot, upper V on left slot
22 +75 V unreg. via 2 kΩ from −100 V regulator input, regulator bypass resistor in plug-in to ground
23 −100 V reg.
24 CRT cathode NC on right slot; grounded by amplifiers, NC in timebases

Pin group function legend

 DC power 
 AC and heater power 
 Deflection and Trigger Signals 
Control Signals