109: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Removed incorrectly named images of a 107.)
mNo edit summary
Line 42: Line 42:
==Pictures==
==Pictures==
<gallery>
<gallery>
File:109_front.jpg        | Front view
109_front.jpg        | Front view
File:109_right.jpg        | Right internal
109_right.jpg        | Right internal
File:109_left.jpg          | Left internal
109_left.jpg          | Left internal
File:109_back.jpg          | Rear view (connector not original)
109_back.jpg          | Rear view (connector not original)
File:109_impulse.jpg      | flying spot caught with 7904, S6, 7T11, 7M11. 2.5 V<sub>pk</sub>, T<sub>r</sub>=240 ps
109_impulse.jpg      | flying spot caught with 7904, S6, 7T11, 7M11. 2.5 V<sub>pk</sub>, T<sub>r</sub>=240 ps
File:Tek 109 schematic.png | schematic
Tek 109 schematic.png | schematic
File:Tek-017-067.jpg      | 017-067 Charge network for 109
Tek-017-067.jpg      | [[017-067]] Charge network for 109
File:017-067.jpg          | 017-067 Charge network for 109 (description)
017-067.jpg          | 017-067 Charge network for 109 (description)
Tek 109 front.jpg
Tek 109 front.jpg
Tek 109 front2.jpg
Tek 109 front2.jpg

Revision as of 06:01, 6 July 2018

The Tektronix Type 109 is a pulse generator introduced in 1962. It uses a GR-874 50 Ω output connector and has a specified rise time of 250 ps.

Key Specifications

Rise time 250 ps
Pulse frequency 550 to 720 Hz
Pulse length 0.5 ns to 100 ns with a single charge line between the two charge line connectors, or up to 300 ns at half pulse rate with one open-ended charge line (other connector grounded)
Pulse amplitude Internal supply: 0 to 50 V variable in three ranges (0.5 V, 5 V, 50 V), positive or negative, or external up to ± 300 V

Manuals

Internals

The 109's operating principle is that of a charged transmission line pulse generator with a mechanical reed switch and external 50 Ω transmission line/lines attached through two GR-874 50 Ω connectors. The length of the external cables determines the impulse width. Using two transmission lines of non-equal length, alternating pulses having different width can be produced. Alternatively, an R-C network can be used to create pulses with R-C decay characteristic but longer duration.

The pulse-generating switch in the 109 is a mechanical mercury switch, which limits pulse frequency to about 600 Hz. Moreover, this switch has a relatively short life time (200 hours) — if the operator forgets to shut the 109 down over the weekend and some holidays, the reed switch will need replacement.

The internal voltage source is adjustable from 0 to 50 V in three ranges (0.5 V, 5 V, 50 V), either positive or negative. Using external voltage sources, pulses up to 300 V of either polarity are possible, including alternating positive/negative pulses.

Repair issues

Be aware during servicing that the thermal breaker is on full mains and has no protection cover!

Links

Pictures