PG506: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{TM500 | mfg=Tektronix | type=PG506 | function=1 MHz calibration generator | class=pulse generator | image=Tek pg506 late.JPG | introduced=1974 | discontinued=1993 | | {{TM500 | mfg=Tektronix | type=PG506 | function=1 MHz calibration generator | class=pulse generator | image=Tek pg506 late.JPG | introduced=1974 | discontinued=1993 | | ||
manuals= | manuals= | ||
* [[Media:070-1740-01.pdf|Tektronix PG506 Manual for sn 39999 and below (OCR, | * [[Media:070-1740-01.pdf|Tektronix PG506 Manual for sn 39999 and below (OCR, PDF)]] | ||
* [http://w140.com/smb/PG506_SM.pdf Tektronix PG506 Manual for sn 40000 and above (OCR, PDF)] | * [http://w140.com/smb/PG506_SM.pdf Tektronix PG506 Manual for sn 40000 and above (OCR, PDF)] | ||
}} | }} | ||
Revision as of 07:12, 5 December 2018
The Tektronix PG506 is a 1 MHz calibration generator plug-in for the TM500 system.
There are (at least) two versions of the PG506. The older version has two relays that switch a low-pass (noise) filter into the 10 V and below ranges. The new version just has a capacitor across the output for these ranges.
Common failure modes: In case of low or no output on the 20 V and above ranges, check Q270, Q280 and Q290.
Pictures
PG506 older version
PG506 newer version
-
-
PG506 Left Internal
-
PG506 Left Internal
-
PG506 Right Internal
-
PG506 Right Internal
PG506A
-
PG506A Front
-
Newer version without filter relays
-
PG506A
-
PG506A output waveform
