1230: Difference between revisions
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
* [[Media:070-6438-02.pdf|1225 Operator Manual]] (77 MB, PDF) | * [[Media:070-6438-02.pdf|1225 Operator Manual]] (77 MB, PDF) | ||
* Service manual needed [[Category: Manual needed]] | * Service manual needed [[Category: Manual needed]] | ||
====ROM images==== | |||
* [[Media:160-5178-02.BIN|160-5178-02]] | |||
* [[Media:160-5179-03.BIN|160-5179-03]] | |||
* [[Media:160-5530-00.BIN|160-5530-00]] | |||
* [[Media:160-5531-01.BIN|160-5531-00]] | |||
}} | }} | ||
The '''Tektronix 1230''' is a logic analyzer chassis that supports 16 to 64 channels, 100 MHz asynchronous, 25 MHz synchronous. | The '''Tektronix 1230''' is a logic analyzer chassis that supports 16 to 64 channels, 100 MHz asynchronous, 25 MHz synchronous. | ||
Revision as of 04:32, 4 March 2019
The Tektronix 1230 is a logic analyzer chassis that supports 16 to 64 channels, 100 MHz asynchronous, 25 MHz synchronous. It was introduced in 1989, a year after the 1225 and 1220.
The 1230 is very similar to the Tektronix 1225 and 1220, the difference being board layout and the number of channels. Four user-installable option boards were available − parallel printer interface, RS-232 interface, GPIB interface and on-line notes in foreign languages. Tektronix also had a software package S43R101 that would run on IBM PC compatible machines. It used the RS-232 port to control the analyzer. A digitizing scope card could be installed with a 100 MS/s resolution on two channels 1230DSM. It was also available as a all in one package (1230D).
There was another variant, the 1230B. The only difference was that it had a self-contained internal rechargeable battery.
Key Specifications
| Probes | either P6442, P6443 or P6444 (16-channel) |
|---|---|
| Number of channels | 64 channels |
| CRT | 13 x 10 cm |
| Power | 90-250 V |
| Weight | 8.6 kg (19 lb.) (1230)
12.2 kg (29 lb.) (1230B) |
| Features |
|
Easter egg
An "Easter egg" can be activated in the 1230 by pressing the STOP button when the welcome screen shows during power-up. A bar with the programmers' names will display near the bottom of the screen.
Links
- MD's 1230 page
- Tek 1230 ROM dumps on MD's Tek 1230 page
- Tektronix training videos for the 1230 @ YouTube: Part 1 / Part 2
