7313: Difference between revisions

Revision as of 10:14, 31 October 2020

{{{manufacturer}}}
25 MHz storage mainframe Tektronix 7313 Produced from 1972 to 1979 Manuals Operator manual needed Tektronix 7313 Service Manual (PDF, 265 MB) 7xx3 pushbutton illumination mod (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 7313 is a 25 MHz storage oscilloscope mainframe (mistakenly identified as 65 MHz on the Tektronix web site) that accepts two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. There is also a rack-mount version, the R7313.

Project Engineer for the 7313 was John McCormick.

Key Specifications

please add

Internals

The direct view bistable storage CRT (154-0682-02,-10,-12) is 8 cm tall and 10 cm wide. The upper half and lower half are independently controllable with regard to storage settings.

The low voltage power supply is linear. It produces +50V, -50V, +15V, -15V, +5V, and +130V.

The vertical amplifier is fully discrete.

The 7313 is the only 7000-series scope that doesn't use post-deflection acceleration, due to the low bandwidth. CRT cathode voltage is -4 kV.

Prices

1973: $2,000

Links

Three kinds of Storage, in Tekscope, July 1972 or @ radiomuseum.org

Pictures

7D01 and DF1 in 7313
Low voltage power supply
Vertical amplifier
R7313

@@ Line 17: / Line 17: @@
 and one [[7000-series_plug-ins#Horizontal plug-ins|7000-series horizontal plug-in]].
 There is also a rack-mount version, the R7313.
+Project Engineer for the 7313 was [[John McCormick]].
 {{MissingSpecs}}