SG505: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
Jaredcabot (talk | contribs) m (Added labels on pictures) |
||
| Line 22: | Line 22: | ||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
USA Tektronix SG505 Front0.jpg | USA Tektronix SG505 Front0.jpg|Front Panel | ||
USA_Tektronix_SG505_LayoutSide.jpg | USA_Tektronix_SG505_LayoutSide.jpg|PCB Right Side | ||
USA_Tektronix_SG505_CompSide.jpg | USA_Tektronix_SG505_CompSide.jpg|PCB Left Side | ||
USA_Tektronix_SG505_CompSideB.jpg | USA_Tektronix_SG505_CompSideB.jpg|PCB Left Side Detail | ||
Tek sg505 front.jpg | Tek sg505 front.jpg|Front Panel | ||
SG505_Option2_3-4_View.jpg | SG505_Option2_3-4_View.jpg|Option 2 3/4 View | ||
SG505_Option2_Front_Panel.jpg | SG505_Option2_Front_Panel.jpg|Option 2 Front Panel | ||
SG505_Option2_Left_Internal.jpg | SG505_Option2_Left_Internal.jpg|Option 2 Left Internal | ||
SG505_Option2_Right_Internal.jpg | SG505_Option2_Right_Internal.jpg|Option 2 Right Internal | ||
</gallery> | </gallery> | ||
Revision as of 22:17, 8 August 2020
The Tektronix SG505 is a ultra-low distortion oscillator plug-in for the TM500 system.
Option 01 adds an intermodulation test signal function.
Option 02 adds a fully balanced output to +28 dBm and selectable source impedance with corresponding changes to the front panel connections. It also includes Option 01.
Key Specifications
| Frequency range | 10 Hz to 100 kHz nom. (typ. 9 Hz to 110 kHz) in four overlapping ranges |
|---|---|
| Frequency accuracy | 3% of dial reading |
| Output level | +10 dBm to -60 dBm into 600 Ω in eight 10 dB steps, plus variable control +2.2 dB to -10 dB from calibrated position |
| Output impedance | 600 Ω |
| Distortion | < 0.0008% (-102 dB) from 20 Hz to 20 kHz |
| Sync output | 200 mVRMS sine to 20 kHz, at least 120 mV @ 100 kHz; 1 kΩ source impedance |
| Topology | State-variable oscillator with N-FET (151-1021-00) based AGC. Range switches change capacitors and AGC time constants, main dial changes integrator resistor. Oscillator built from NE5534 amplifiers. |
Pictures
-
Front Panel
-
PCB Right Side
-
PCB Left Side
-
PCB Left Side Detail
-
Front Panel
-
Option 2 3/4 View
-
Option 2 Front Panel
-
Option 2 Left Internal
-
Option 2 Right Internal
