Restoring 1220, 1225 and 1230 keypad: Difference between revisions
Jump to navigation
Jump to search
m (→Fix) |
No edit summary |
||
Line 1: | Line 1: | ||
'''''See also →''' [[Rebuilding 1230 keypad using 3D printer]]'' | |||
==Description== | ==Description== | ||
Line 13: | Line 15: | ||
*The switches that the keypad uses are still being manufactured today. They are C&K D6L90F1LFS and the D6L90F2LFS, they are the exact same. The difference being the force required to push the buttons. One takes 1.3 Newtons and the other 2 Newtons (Pic3). The keypad has 26 of them. Replacing them with new ones will fix the excessive bouncing. When de-soldering the switches one has to be careful of burning the PCB and lifting pads because the traces are very small. | *The switches that the keypad uses are still being manufactured today. They are C&K D6L90F1LFS and the D6L90F2LFS, they are the exact same. The difference being the force required to push the buttons. One takes 1.3 Newtons and the other 2 Newtons (Pic3). The keypad has 26 of them. Replacing them with new ones will fix the excessive bouncing. When de-soldering the switches one has to be careful of burning the PCB and lifting pads because the traces are very small. | ||
: | :→ [[Media:D6L90F1LFS.pdf|Datasheet for D6L90F1LFS and D6L90F2LFS ]] | ||
<div style="clear: both"></div> | <div style="clear: both"></div> | ||
Latest revision as of 07:58, 19 January 2022
See also → Rebuilding 1230 keypad using 3D printer
Description
![](http://w140.com/tekwiki/images/thumb/5/5c/Bounce%281%29.jpg/250px-Bounce%281%29.jpg)
![](http://w140.com/tekwiki/images/thumb/0/0c/Bounce%282%29.jpg/250px-Bounce%282%29.jpg)
- The 1220, 1225 and 1230 have a keypad interface for controlling them. The switches are tactile switches with a small spring. Over time they start to become extremely "bouncy". This is due to a number of factors, some including corrosion and weakening springs. Over time this will lead to problems such as the keypad being less responsive and the analyzer registering multiple presses.
Picture 1 shows what the keypad is registering.
Fix
![](http://w140.com/tekwiki/images/thumb/c/c2/Bounce%284%29.jpg/250px-Bounce%284%29.jpg)
![](http://w140.com/tekwiki/images/thumb/a/a1/Bounce%285%29.jpg/250px-Bounce%285%29.jpg)
- WARNING! When taking the analyzer apart, users are at their own risk! The inside contains lethal voltages and precaution must be taken.
- The switches that the keypad uses are still being manufactured today. They are C&K D6L90F1LFS and the D6L90F2LFS, they are the exact same. The difference being the force required to push the buttons. One takes 1.3 Newtons and the other 2 Newtons (Pic3). The keypad has 26 of them. Replacing them with new ones will fix the excessive bouncing. When de-soldering the switches one has to be careful of burning the PCB and lifting pads because the traces are very small.
Conclusion
![](http://w140.com/tekwiki/images/thumb/6/6f/Bounce%283%29.jpg/250px-Bounce%283%29.jpg)
- It is not known how long this fix will last, but it makes the unit usable again. After the replacement the signal is now clean (Pic5).