067-0587-10: Difference between revisions
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
<gallery> | <gallery> | ||
Tek 067-0587-10.JPG | Tek 067-0587-10.JPG | ||
Tek-067-0587-02 left.jpg | 067-0587-10 left side (cam switch assembly on bottom left) | |||
Tek-067-0587-02 right.jpg | 067-0587-10 right side − note extra switch and resistor in top middle area of PCB that differentiates it from [[067-0587-02]] | |||
067-0587-10_11k_mod_rear.jpg | 067-0587-10 with modified rear plastic interface to fit [[11000-series scopes]] | 067-0587-10_11k_mod_rear.jpg | 067-0587-10 with modified rear plastic interface to fit [[11000-series scopes]] | ||
</gallery> | </gallery> | ||
Revision as of 23:09, 6 March 2021
Template:Plugin Sidebar 2 The Tektronix 067-0587-10 is a Calibration fixture / signal standardizer for 7000-series scopes. It has the same performance specifications as the 067-0587-02 but is modified for compatibility with the 7612D.
In the 067-0587-10, the signal coming from the PRETRIG OUT generates one trigger for each staircase signal when used with the TEST switch in the GAIN position. The 067-0587-02 generates a pre-trigger signal on the PRETRIG OUT connector while in any mode.
Key Specifications
- please add
Pictures
-
-
067-0587-10 left side (cam switch assembly on bottom left)
-
067-0587-10 right side − note extra switch and resistor in top middle area of PCB that differentiates it from 067-0587-02
-
067-0587-10 with modified rear plastic interface to fit 11000-series scopes
