326: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | {{Oscilloscope Sidebar | ||
|manufacturer=Sony/Tektronix | |manufacturer=Sony/Tektronix | ||
|series= | |||
|model=326 | |model=326 | ||
|summary=10 MHz dual trace portable scope | |summary=10 MHz dual trace portable scope |
Revision as of 08:52, 11 August 2021
The Sony/Tektronix 326 is an ultra-portable 10 MHz dual trace oscilloscope with a 300 ns delay line and a removable battery pack.
The power supply and oscilloscope are separable. The scope can be be operated without power supply.
Electrically, it is relatively classic, but it is not constructed like classic Tek scopes.
The 326 has no Tek-made ICs. It uses many Sony transistors.
The 326's power supply/charger is conceptually similar to that of the 323, but the 0.3 Ω resistor is in the battery pack.
Key Specifications
Bandwidth | 10 MHz (approx. 5 MHz in ×10 mode) |
---|---|
Rise time | 36 ns (72 ns in ×10 mode) |
Sweep | 1 μs/Div to 1 s/Div, 1−2−5, ×10 magnifier (i.e. to 100 ns/Div) |
Deflection | 10 mV/Div to 10 V/Div (1 mV/Div to 1 V/Div in ×10 mode) |
Input impedance | 1 MΩ // 47 pF |
Calibrator | 0.5 Vp-p, 800 Hz ±250 Hz, source impedance 10 kΩ |
CRT | 10 × 8 Div. @ 6.25 mm (0.25"), 154-0667-xx |
AC Power | 90—136 V or 180—272 V, 48—440 Hz, 35 VA at 136 V (maximum intensity, maximum charge rate) |
DC Power | 9—32 V, 12 W max. |
Battery | Nine size "C" NiCd cells, runtime 1.5 h (full intensity) / 4 h (low intensity), charge time 16 h |
Dimensions | 10.2 cm × 22.2 cm × 38.1 cm (31 cm without charger) |
Weight | 5.9 kg (4.5 kg without charger) |
Features |
|
Pictures
-
front
-
rear
-
open, lower
-
open, upper
-
new battery pack (homemade from 9 pieces NiCd sub-C cell)
-
-
-
-