SG505: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
* [[Media:Tek sc505 eis no ocr.pdf|Tektronix SG 505 Engineering Instrument Specification (PDF)]] | * [[Media:Tek sc505 eis no ocr.pdf|Tektronix SG 505 Engineering Instrument Specification (PDF)]] | ||
}} | }} | ||
Option 01 adds an intermodulation test signal function.<br> | Option 01 adds an intermodulation test signal function.<br> | ||
Option 02 adds a fully balanced output to +28 dBm and selectable source impedance with corresponding changes to the front panel connections. It also includes Option 01. | Option 02 adds a fully balanced output to +28 dBm and selectable source impedance with corresponding changes to the front panel connections. It also includes Option 01. | ||
| Line 10: | Line 9: | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Frequency range | 10 Hz to 100 kHz nom. (typ. 9 Hz to 110 kHz) in four overlapping ranges }} | {{Spec | Frequency range | 10 Hz to 100 kHz nom. (typ. 9 Hz to 110 kHz) in four overlapping ranges }} | ||
{{Spec | | {{Spec | Frequency accuracy | 3% of dial reading }} | ||
{{Spec | Output level | +10 dB<sub>m</sub> to | {{Spec | Output level | +10 dB<sub>m</sub> to −60 dB<sub>m</sub> into 600 Ω in eight 10 dB steps, plus variable control +2.2 dB to −10 dB from calibrated position }} | ||
{{Spec | Output impedance | 600 Ω }} | {{Spec | Output impedance | 600 Ω }} | ||
{{Spec | Distortion | < 0.0008% ( | {{Spec | Distortion | < 0.0008% (−102 dB) from 20 Hz to 20 kHz }} | ||
{{Spec | Sync output | 200 mV<sub>RMS</sub> sine to 20 kHz, at least 120 mV @ 100 kHz; 1 kΩ source impedance }} | {{Spec | Sync output | 200 mV<sub>RMS</sub> sine to 20 kHz, at least 120 mV @ 100 kHz; 1 kΩ source impedance }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
==Internals== | |||
The SG505 uses a state-variable oscillator topology employing NE5534 opamps and an N-FET (151-1021-00) based AGC. Range switches change capacitors and AGC time constants, the main dial changes the integrator resistor. | |||
It's internally an surprisingly unremarkable device, no special tricks or selected parts (except for the AGC FET, which is probably some COTS FET selected for threshold voltage and distortion), just an ordinary SVO, some NE553x, standard attenuator and that's it. | |||
==Pictures== | ==Pictures== | ||
Revision as of 02:59, 1 October 2021
The Tektronix SG505 is a ultra-low distortion oscillator plug-in for the TM500 system.
Option 01 adds an intermodulation test signal function.
Option 02 adds a fully balanced output to +28 dBm and selectable source impedance with corresponding changes to the front panel connections. It also includes Option 01.
Key Specifications
| Frequency range | 10 Hz to 100 kHz nom. (typ. 9 Hz to 110 kHz) in four overlapping ranges |
|---|---|
| Frequency accuracy | 3% of dial reading |
| Output level | +10 dBm to −60 dBm into 600 Ω in eight 10 dB steps, plus variable control +2.2 dB to −10 dB from calibrated position |
| Output impedance | 600 Ω |
| Distortion | < 0.0008% (−102 dB) from 20 Hz to 20 kHz |
| Sync output | 200 mVRMS sine to 20 kHz, at least 120 mV @ 100 kHz; 1 kΩ source impedance |
Internals
The SG505 uses a state-variable oscillator topology employing NE5534 opamps and an N-FET (151-1021-00) based AGC. Range switches change capacitors and AGC time constants, the main dial changes the integrator resistor.
It's internally an surprisingly unremarkable device, no special tricks or selected parts (except for the AGC FET, which is probably some COTS FET selected for threshold voltage and distortion), just an ordinary SVO, some NE553x, standard attenuator and that's it.
Pictures
-
Front Panel
-
PCB Right Side
-
PCB Left Side
-
PCB Left Side Detail
-
Front Panel
-
Option 2 3/4 View
-
Option 2 Front Panel
-
Option 2 Left Internal
-
Option 2 Right Internal
