5642: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
|Part_nos=154-0051-00, 154-0079-00 | |Part_nos=154-0051-00, 154-0079-00 | ||
|Description=directly-heated high-voltage rectifier | |Description=directly-heated high-voltage rectifier | ||
|Used_in=360;453;502;502A;504;506;513;515;516;533;533A;535;543;543A;543B;545;545A;545B;547;551;555;567;575;647 | |Used_in=360;453;502;502A;504;506;513;515;516;533;533A;535;543;543A;543B;545;545A;545B;547;551;555;567;575;581;581A;585;585A;647 | ||
|Designers= | |Designers= | ||
}}. It has three flexible lead connections and is intended to be soldered into the circuit. | }}. It has three flexible lead connections and is intended to be soldered into the circuit. | ||
Revision as of 00:01, 11 October 2021
The 5642 (European: DY70 (similar)) (P/N 154-0051-00, 154-0079-00) is a directly-heated high-voltage rectifier vacuum tube. It has three flexible lead connections and is intended to be soldered into the circuit.
The European type DY70 is very similar (with lower heater current, 140 mA).
It is used in the CRT cathode and post-deflection acceleration supplies in many Tektronix scopes. In typical CRT circuits, the filament/cathode leads of each 5642 have their own secondary winding on the HV transformer, typically a single loop of wire with extra silicone tube insulation.
Key Specifications
| Heater | 1.25 V, 200 mA |
|---|---|
| Peak inverse voltage | 10 kV |
| Peak plate current | 250 μA |
Links
- RCA 5642 datasheet (PDF)
- 5642 / DY70 @ radiomuseum.org
