TDS620: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Added manuals and software)
(Added specs)
Line 54: Line 54:
}}
}}


The '''Tektronix TDS620A''' is a 500 MHz, 2 GS/s dual-channel digital storage scope with 2000 points maximum record length per channel. <br>
The '''Tektronix TDS620A''' is a 500 MHz, 2 GS/s 2-channel digital storage scope with a monochrome screen, with 2000 points maximum record length per channel. <br>
The '''Tektronix TDS620B''' has 2.5 GS/s sample rate and 15,000 points maximum record length per channel.  
The '''Tektronix TDS620B''' has 2.5 GS/s sample rate and 15,000 points maximum record length per channel.<br>
 
Two plus Two channel operation allows up to two of the four channels to be displayed simultaneously.<br>
It has [[Tekprobe BNC connector]]s on all input channels.
Channels not displayed can be used to couple a triggering signal to the oscilloscope.
 
The quad-channel version is the [[TDS640]].


{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Bandwidth       | 500 MHz                  }}
{{Spec | Bandwidth   | 500 MHz }}
{{Spec | Sampling rate   | 2 GS/s (TDS644A), 2,5 GS/s (TDS644B) on all 4 channels }}
{{Spec | Sample rate | 2 GS/s (TDS644A), 2,5 GS/s (TDS644B) on all channels }}
{{Spec | Time base        | 500 ps/Div to 5 s/Div    }}
{{Spec | Number of Channels | 2 + 2 }}
{{Spec | Deflection      | 1 mV/Div to 10 V/Div    }}
{{Spec | Vertical Sensitivity| 1 mV to 10 V/div with calibrated fine adjustment }}
{{Spec | Resolution       | 8 bits                  }}
{{Spec | Resolution | 8 bit }}
{{Spec | Record length   | 500 to 2000 points (TDS644A), 15,000 points (TDS644B) }}
{{Spec | Time Base Range| 200 ps to 10 s/div }}
{{Spec | Input impedance | 1 MΩ // 10 pF, or 50 Ω  }}
{{Spec | Record length | 2000 points (TDS644A), 15,000 points (TDS644B) }}
{{Spec | Interface        | GPIB standard            }}
{{Spec | Acquisition modes | sample, envelope, average, high-resolution, peak-detect }}
{{Spec | Options |
{{Spec | Display | Monochrome }}
* Centronics interface
{{Spec | Trigger modes | Edge, logic, pulse; Video trigger with option 05 ([[NTSC]], [[SECAM]], [[PAL]], HDTV, and FlexFormat) }}
* RS-232 interface
{{Spec | Storage | 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive }}
* FFT, integration and differentiation
{{Spec | I/O | Full GPIB programmability }}
}}
{{Spec | Hardcopy | Using [[GPIB]], [[RS-232]], or Centronics ports }}
{{EndSpecs}}
{{EndSpecs}}



Revision as of 02:38, 1 May 2022

Tektronix TDS620
500 MHz, 2 GS/s, 2-Ch digital scope
Tektronix TDS620

Produced from 1993 to (?)

Manuals

Common

TDS620

TDS620A

TDS620B

Schematics

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures


The Tektronix TDS620A is a 500 MHz, 2 GS/s 2-channel digital storage scope with a monochrome screen, with 2000 points maximum record length per channel.
The Tektronix TDS620B has 2.5 GS/s sample rate and 15,000 points maximum record length per channel.
Two plus Two channel operation allows up to two of the four channels to be displayed simultaneously.
Channels not displayed can be used to couple a triggering signal to the oscilloscope.

Key Specifications

Bandwidth 500 MHz
Sample rate 2 GS/s (TDS644A), 2,5 GS/s (TDS644B) on all channels
Number of Channels 2 + 2
Vertical Sensitivity 1 mV to 10 V/div with calibrated fine adjustment
Resolution 8 bit
Time Base Range 200 ps to 10 s/div
Record length 2000 points (TDS644A), 15,000 points (TDS644B)
Acquisition modes sample, envelope, average, high-resolution, peak-detect
Display Monochrome
Trigger modes Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O Full GPIB programmability
Hardcopy Using GPIB, RS-232, or Centronics ports

Software


Firmware

Options

  • 05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
  • 1M - 4M acquisition length - Extends standard acquisition length from 50,000 points per channel to 130,000 samples on three or four channels, 250,000 samples on two channels, and 500,000 samples on one channel.
  • 13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
  • 1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
  • 2F - Advanced DSP math - Add advanced DSP math features such as FFT, integration, and differentiation.

Optional Accessories

  • 1K - Add K420 scope cart
  • 1R - Rackmount kit
  • 2D - Delete standard 2 P6205 probes
  • 22 - (TDS620A) Add 2 each P6139A passive probes
  • 23 - (TDS620A) Add 4 each P6245 active FET probes
  • 24 - (TDS620B) Add 4 each P6139A passive probes
  • D1 - Calibration data report

TDS620A Included Accessories

  • 2x P6205 FET Probes
  • 070-8711-02 - Reference Manual
  • 070-8711-01 - User Manual
  • 200-3696-01 - Front cover
  • 161-0230-01 - US power cord

TDS620B Included Accessories

  • 2x P6139A FET Probes
  • 070-9382-00 - Quick Reference Guide
  • 063-2773-00 - Programmers Manual in MS-Help format on floppy disk
  • 070-6869-00 - User Manual
  • 070-9874-02 - Technical Reference Manual
  • 200-3696-01 - Front cover
  • 161-0230-01 - US power cord

Recommended Accessories

  • 012-0991-01 - 1m GPIB cable
  • 012-0991-00 - 2m GPIB cable
  • 012-1298-00 - RS-232 cable
  • 012-1250-00 - Centronics cable
  • 016-0909-01 - Soft-sided carrying case
  • 016-01135-00 - Transit case
  • K420 - Scope cart

Links

Pictures

  • please add