DM501A/Repairs: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
For repair or for building your own temperature sensor you need a PT1-100 sensor and a LEMO connector.
For repair or for building your own temperature sensor you need a PT-100 sensor and a LEMO connector.


The LEMO connector:
The LEMO connector:

Revision as of 01:17, 13 September 2023

For repair or for building your own temperature sensor you need a PT-100 sensor and a LEMO connector.

The LEMO connector:

  • Series: S
  • The diameter: 0S (S-Series, diameter 0)
  • Insert configuration: 302 (2 pins)


The following LEMO configuration is known to fit:

  • Connector: FFA0S302CLA (2.2 to 4.4 mm cable)
  • Bend relief: GMA0B035 (3.5 to 3.9 mm cable)

As the PT-100 is connected with only 2 wires, each sensor has to be trimmed with R1001 (offset).