SKA6516: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Guess how I found out it's that way!)
m (fixing something)
Line 28: Line 28:
'''Pinout'''
'''Pinout'''


The pinout of this transistor does not correlate with modern BJTs. With the flat part facing you, from left to right, the pin is collector, base, and emitter. Incorrectly inserting a modern replacement thinking that it follows a standard emitter base collector can potentially bring down the equipment.
The pinout of this transistor does not correlate with most modern BJTs. With the flat part facing you, from left to right, the pin is collector, base, and emitter. Incorrectly inserting a modern replacement thinking that it follows a standard emitter base collector can potentially bring down the equipment.


{{MissingSpecs}}
{{MissingSpecs}}

Revision as of 21:17, 26 August 2023

The SKA6516  (P/N 151-0367-00) is an NPN Transistor. Note: possibly incomplete info, service manuals to be checked.

Zenwizard Studios found thirteen of these in a 475 and thirteen of those tested as having a parasitic reverse diode junction.

I've listed eighteen from the 475 Service Manual in the 475 Repairs page.

Suitable Modern Replacement

The 475 Service manual lists some of the transistors with alternatives, and some without - so I'd be careful to check that some need to be closer in spec than others.

In his video, Mr ZenWizard Studios used Fairchild/On Semi KSP10BU from Mouser. Farnell has them, too.

In the 1982 Common Design Parts catalog, -0367 is Cross referenced as AST3571 which appears to be a custom 2N3571.

How to identify this transistor

It's not very hard to identify these transistors. They will have a 151-367 number on them and when tested will show a reverse polarity protection diode, which should not be there. These typically have a 100% failure rate so you should replace them with the recommended transistor listed in the "Suitable Modern Replacements" section.

Pinout

The pinout of this transistor does not correlate with most modern BJTs. With the flat part facing you, from left to right, the pin is collector, base, and emitter. Incorrectly inserting a modern replacement thinking that it follows a standard emitter base collector can potentially bring down the equipment.

Key Specifications

  • please add

Pictures

Used in

Some instruments using part SKA6516

Instrument Manufacturer Class Model Description Introduced
465 Tektronix Oscilloscope 465 Portable 100 MHz dual-trace scope 1972
465B Tektronix Oscilloscope 465B Portable 100 MHz dual-trace scope 1980
466 Tektronix Oscilloscope 466 Portable 100 MHz dual-trace storage scope 1974
475 Tektronix Oscilloscope 475 Portable 200 MHz dual-trace scope 1972