36,756
edits
P6451: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
The only active components are two [[155-0137-00]] custom hybrid pre-amp/comparator modules containing comparators with FET inputs and differential ECL outputs that can drive terminated 100 Ω lines. The instrument input would contain differential ECL receivers like the 10115 or 10216. | The only active components are two [[155-0137-00]] custom hybrid pre-amp/comparator modules containing comparators with FET inputs and differential ECL outputs that can drive terminated 100 Ω lines. The instrument input would contain differential ECL receivers like the 10115 or 10216. | ||
Input lead sets: | Input lead sets (same as for the [[P6406]]): | ||
* [[012-0747-00]] - standard 10-wire 25 cm with pluggable probe tips | * [[012-0747-00]] - standard 10-wire 25 cm with pluggable probe tips | ||
* 012-0655-01 - ten individual 40 cm leads | * 012-0655-01 - ten individual 40 cm leads | ||
| Line 14: | Line 14: | ||
* 012-0800-00 - 10-wire 10 cm | * 012-0800-00 - 10-wire 10 cm | ||
The probe-side input connector is a standard .65 mm pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | The probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | ||
Part numbers for the P6451 are 010-6451-03 (straight connector) or 010-6451-05 (90° connector e.g. for [[308]]). | Part numbers for the P6451 are 010-6451-03 (straight connector) or 010-6451-05 (90° connector e.g. for [[308]]). | ||