2336: Difference between revisions

2336 (view source)

Revision as of 04:56, 4 November 2020

14 bytes removed , 4 November 2020

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

37,229

edits

@@ Line 20: / Line 20: @@
 {{BeginSpecs}}
-{{Spec | Bandwidth and Channels| 100 MHz in a 1, 2, 5 sequence; Bandwidth is at least 88 MHz at 2 mV/div; 2 Channels }}
+{{Spec | Bandwidth | 100 MHz (≥88 MHz at 2 mV/div) }}
-{{Spec | Deflection Factor| CH 1, 2: 5 mV/div to 5 V/div, all ±3%; Variable control can increase sensitivity to at least 2 mV/div.}}
+{{Spec | Deflection | 5 mV/div to 5 V/div (1−2−5 sequence), ±3%; Variable control can increase sensitivity to at least 2 mV/div}}
-{{Spec | Input Impedance| 1 MΩ ±2% and 20 pF ±10% }}
+{{Spec | Input Impedance | 1 MΩ ±2% // 20 pF ±10%, 2 channels }}
 {{Spec | Maximum Input Voltage| 400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz) }}
-{{Spec | Sweep Speeds| A Time Base: 0.5 s/div to 50ns/div; B Time Base: 50 ms/div to 50 ns/div; A and B X10 magnifier extends max sweep to 5 ns/div }}
+{{Spec | Sweep | A Time Base: 0.5 s/div to 50 ns/div, 1−2−5; B Time Base: 50 ms/div to 50 ns/div, 1−2−5; A and B ×10 magnifier extends max sweep to 5 ns/div }}
 {{Spec | Trigger Source| VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10 }}
 {{Spec | Trigger Coupling| AC, LF REJ, HF REJ, or DC }}
-{{Spec | Probes| Two P6108A 100 MHz X10 probes, BNC connector with a readout pin }}
+{{Spec | Probes| Two [[P6108A]] 100 MHz ×10 probes, BNC connector with a readout pin }}
-{{Spec | Power| 40 W max, 90 − 250 VAC, 48 − 440 Hz }}
+{{Spec | Power| 40 W max, 90 − 250 V<sub>AC</sub>, 48 − 440 Hz }}
 {{EndSpecs}}
@@ Line 37: / Line 37: @@
 <gallery>
-Tektronix_2336.jpg
+Tektronix 2336.jpg
 </gallery>
   [[Category:2300 series scopes]]