1502: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(cat corr.)
(+link)
Line 1: Line 1:
[[Image:Tek1502-front.JPG|600px|center]]
[[Image:Tek1502-front.JPG|thumb|600px|right|Tektronix 1502 Time Domain Reflectometer]]


The Tektronix 1502 is a series of Time Domain Reflectometers commonly used to test coaxial
The '''Tektronix 1502''' is a series of Time Domain Reflectometers commonly used to test coaxial
cables athough they have many other uses.  The US military was a major purchaser; most of the
cables although they have many other uses.  The US military was a major purchaser, most of the
first series (the 1502, no letter) will be found surplus with some sort of US military
first series (the 1502, no letter) will be found surplus with some sort of US military
property ID tag and an NSN sticker.
property ID tag and an NSN sticker.


The first version used a CRT and is almost completely analog along with some discrete digital
The first version used a CRT and is almost completely analog along with some discrete digital
logic used to prefire and fire the [[tunnel diodes|tunnel diode]] pulser.  The later models (1502B/C) used an
logic used to pre-fire and fire the [[tunnel diodes|tunnel diode]] pulser.  The later models (1502B/C)  
LCD display and a microprocessor.  The other major difference is the line charging method.
used an LCD display and a microprocessor.  The other major difference is the line charging method.
The 1502 uses a fast (36 ps) tunnel diode pulser, the later models used a half sine wave to
The 1502 uses a fast (36 ps) tunnel diode pulser, the later models used a half sine wave to
charge the line.  The TD pulser, with it's Dirac delta edge gives much better short range
charge the line.  The TD pulser, with its Dirac delta edge gives much better short range
sensitivity although it is much easier to destroy.
sensitivity although it is much easier to destroy.


There are four key parts in the 1502 that make repair difficult.  The original sampling gate (CR1732, Tek 152-0631-00) is no longer available, but Avago RF Schottky barrier diodes in the SOT series pair package (Avago HSMS-2822, HSMS-282C) are a close substitute.   
There are four key parts in the 1502 that make repair difficult.  The original sampling gate  
(CR1732, Tek [[152-0631-00]]) is no longer available, but Avago RF Schottky barrier diodes in  
the SOT series pair package (HSMS-2822, HSMS-282C) are a close substitute.   


There is a [[snap-off diode]] (CR1632, Tek [[152-0335-01]]) in the samping gate pulse shaper that is also no longer available but it usually doesn't fail.   
There is a [[snap-off diode]] (CR1632, Tek [[152-0335-01]]) in the sampling gate pulse shaper  
that is also no longer available but it usually doesn't fail.   


The first pulse shaping TD (CR1609, tek [[152-0140-01]], 10 mA, 8 pF) was a fairly common TD and there are Russian substitutes available.  The primary fast pulse TD (CR1703, Tek [[152-0489-00]], 21 mA, 1.5 pF) is simply no longer available.  Good Luck!
The first pulse shaping TD (CR1609, tek [[152-0140-01]], 10 mA, 8 pF) was a fairly common TD  
and there are Russian substitutes available.  The primary fast pulse TD (CR1703, Tek [[152-0489-00]],  
21 mA, 1.5 pF) is simply no longer available.  Good Luck!


If you want to design a replacement, I suggest looking at Analog Devices ADCMP580, and Starecki and Misiaszek's
If you want to design a replacement, I suggest looking at Analog Devices ADCMP580, and Starecki and Misiaszek's paper,
paper "Low cost programmable pulse generator with very short rise/fall time".
''[http://www.ise.pw.edu.pl/~tomi/papers/wilga2006_50ps.pdf Low cost programmable pulse generator with very short rise/fall time]''.


There appears to have been an optional "static supressor" available, Tek 011-0132-00, in a BNC M-F package used to protect the sampler and TD.  It's pretty obscure.
There appears to have been an optional "static suppressor" available, Tek 011-0132-00, in a BNC M-F  
package used to protect the sampler and TD.  It's pretty obscure.


The other common failure is the battery.  The power supply was designed to protect both the instrument
The other common failure is the battery.  The power supply was designed to protect both the instrument
Line 30: Line 36:
will fool the power supply protection circuit into thinking that it's charging a valid battery.
will fool the power supply protection circuit into thinking that it's charging a valid battery.


Service Manuals:
==Manuals==
 
* [http://w140.com/TEK-1502-OM-SM-1.pdf Tektronix 1502 Service Manual (PDF)]
* [http://w140.com/TEK-1502-OM-SM-1.pdf Tektronix 1502 Service Manual (PDF)]
* [http://w140.com/tek_1502b_service.pdf Tektronix 1502B Service Manual (PDF)]
* [http://w140.com/tek_1502b_service.pdf Tektronix 1502B Service Manual (PDF)]
* [http://w140.com/tek_1502c_service.pdf Tektronix 1502C Service Manual (PDF)]
* [http://w140.com/tek_1502c_service.pdf Tektronix 1502C Service Manual (PDF)]
Note that the manuals for the 1502B and 1503C are still available from Tektronix.
:''Note that the manuals for the 1502B and 1503C are still available from Tektronix.''


==Pictures==
<gallery>
<gallery>
Image:Tek1502-top.JPG|Top boards of the 1502
Image:Tek1502-top.JPG|Top boards of the 1502

Revision as of 04:17, 25 June 2014

Tektronix 1502 Time Domain Reflectometer

The Tektronix 1502 is a series of Time Domain Reflectometers commonly used to test coaxial cables although they have many other uses. The US military was a major purchaser, most of the first series (the 1502, no letter) will be found surplus with some sort of US military property ID tag and an NSN sticker.

The first version used a CRT and is almost completely analog along with some discrete digital logic used to pre-fire and fire the tunnel diode pulser. The later models (1502B/C) used an LCD display and a microprocessor. The other major difference is the line charging method. The 1502 uses a fast (36 ps) tunnel diode pulser, the later models used a half sine wave to charge the line. The TD pulser, with its Dirac delta edge gives much better short range sensitivity although it is much easier to destroy.

There are four key parts in the 1502 that make repair difficult. The original sampling gate (CR1732, Tek 152-0631-00) is no longer available, but Avago RF Schottky barrier diodes in the SOT series pair package (HSMS-2822, HSMS-282C) are a close substitute.

There is a snap-off diode (CR1632, Tek 152-0335-01) in the sampling gate pulse shaper that is also no longer available but it usually doesn't fail.

The first pulse shaping TD (CR1609, tek 152-0140-01, 10 mA, 8 pF) was a fairly common TD and there are Russian substitutes available. The primary fast pulse TD (CR1703, Tek 152-0489-00, 21 mA, 1.5 pF) is simply no longer available. Good Luck!

If you want to design a replacement, I suggest looking at Analog Devices ADCMP580, and Starecki and Misiaszek's paper, Low cost programmable pulse generator with very short rise/fall time.

There appears to have been an optional "static suppressor" available, Tek 011-0132-00, in a BNC M-F package used to protect the sampler and TD. It's pretty obscure.

The other common failure is the battery. The power supply was designed to protect both the instrument and the battery from abuse, so any failure will cause the power supply to latch up (via Q6547/Q6549) and the unit will appear dead. The pack is rebuildable with NiCd battery cells. To operate without a battery in place use a 200 to 270 Ω / 10 W power resistor in parallel with a 2200 μF cap (> 25 V); this will fool the power supply protection circuit into thinking that it's charging a valid battery.

Manuals

Note that the manuals for the 1502B and 1503C are still available from Tektronix.

Pictures