602: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(template, cat) |
||
Line 1: | Line 1: | ||
The Tektronix 602 is an X-Y display. | {{Oscilloscope Sidebar | | ||
It has differential X and Y inputs, each with | title=Tektronix 602 | | ||
The bandwidth of the X and Y amplifiers is | summary=X-Y Display | | ||
is matched within 1 degree from DC to | image=Tek 602 2.jpg | | ||
(yellowish green, medium-short persistence). P7 phosphor | caption=Tektronix 602 | | ||
(blueish white, long persistence) was optional. The trace width is 14 mils at | introduced=1969 | | ||
0. | discontinued=(?) | | ||
manuals= | |||
* [http://w140.com/IS44_Tektronix_602_display_unit.pdf Tektronix 602 Manual (PDF)] | |||
* [http://www.bitsavers.org/pdf/dec/unibus/EK-AA11K-TM-001_Jul76.pdf DEC Manual Discussing the Tek 602] | |||
}} | |||
The '''Tektronix 602''' is an X-Y display. | |||
It has differential X and Y inputs, each with 100 mV/div sensitivity. | |||
The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response | |||
is matched within 1 degree from DC to 1 MHz. The standard [[phosphor]] is P31 | |||
(yellowish green, medium-short persistence). P7 phosphor (blueish white, | |||
long persistence) was optional. The trace width is 14 mils at 0.5 μA beam current. | |||
The 602 has a linear power supply. The CRT does not use | |||
post-deflection acceleration, and has -3830 volts on the cathode. | post-deflection acceleration, and has -3830 volts on the cathode. | ||
==Specifications== | |||
[[Category:Specifications needed]] | |||
''please add'' | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Image:Tek 602 2.jpg|Front | Image:Tek 602 2.jpg|Front | ||
Line 17: | Line 33: | ||
Image:Tek 602 deflection.png|Deflection Amplifiers | Image:Tek 602 deflection.png|Deflection Amplifiers | ||
</gallery> | </gallery> | ||
[[Category:CRT based solid-state scopes]] |
Revision as of 10:10, 20 August 2014
The Tektronix 602 is an X-Y display.
It has differential X and Y inputs, each with 100 mV/div sensitivity.
The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz. The standard phosphor is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. The trace width is 14 mils at 0.5 μA beam current.
The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.
Specifications
please add
Pictures
-
Front
-
Top internal
-
Rear
-
Deflection Amplifiers