3S6: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix 3S6 is a dual-trace sampling module for 560-series scopes, particularly the 568. | The Tektronix 3S6 is a dual-trace sampling module for 560-series scopes, particularly the [[568]]. | ||
It interfaces with the sampling heads through a connector on its rear panel. It is programmable, | It interfaces with the sampling heads through a connector on its rear panel. It is programmable, | ||
allowing settings such as mV/cm to be controlled by an external programming unit such as the | allowing settings such as mV/cm to be controlled by an external programming unit such as the | ||
Tektronix Type 240. In a typical setup, the programming unit is connected to the 568 using a | Tektronix Type [[240]]. In a typical setup, the programming unit is connected to the 568 using a | ||
multipin cable. The 568 routes those signals to the plug-ins. | multipin cable. The 568 routes those signals to the plug-ins. | ||
Revision as of 13:14, 3 July 2010
The Tektronix 3S6 is a dual-trace sampling module for 560-series scopes, particularly the 568. It interfaces with the sampling heads through a connector on its rear panel. It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit such as the Tektronix Type 240. In a typical setup, the programming unit is connected to the 568 using a multipin cable. The 568 routes those signals to the plug-ins.