From TekWiki
Jump to: navigation, search
Tektronix 3S6
Sampling plug-in
3S6 front

Compatible with 560-series scopes

Produced from 1969 to (?)

Manuals – Specifications – Links – Pictures

The Tektronix 3S6 is a dual-trace sampling module for 560-series_scopes, particularly the 568.

It interfaces with the sampling heads through a connector on its rear panel (using S-series sampling head extenders). It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit such as the Tektronix Type 240.

In a typical setup, the programming unit is connected to the 568 using a multi-conductor cable. The 568 routes those signals to the plug-ins.


please add