7D13: Difference between revisions
Jump to navigation
Jump to search
(typo) |
(internals) |
||
| Line 11: | Line 11: | ||
}} | }} | ||
The '''Tektronix 7D13''' is a digital multimeter plug-in for [[7000-series scopes]] with CRT readout. It will function in any compartment. | The '''Tektronix 7D13''' is a digital multimeter plug-in for [[7000-series scopes]] with CRT readout. It will function in any compartment. The input section is galvanically isolated, allowing the input to float ±1500 volts with respect to chassis ground. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
| Line 21: | Line 21: | ||
{{Spec | Temperature | -55 °C to +125 °C, requires [[P6058]] voltage/temperature probe }} | {{Spec | Temperature | -55 °C to +125 °C, requires [[P6058]] voltage/temperature probe }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
==Internals== | |||
The 7D13 consists of an analog pulse width modulator front-end built with 741 op amps and dual FETs, and a 3½ digit counter section using standard 74xx TTL parts which is interfacing with the [[7000 series readout system|readout system]]. The front end is isolated using transformers used for pulses and a floating ±15 V supply. | |||
The Probe jack for the P6058 has contacts for the temperature sensor (a diode-connected transistor) as well as the voltage input terminals. | |||
==Links== | ==Links== | ||
Revision as of 02:10, 19 April 2015
Template:Plugin Sidebar 2 The Tektronix 7D13 is a digital multimeter plug-in for 7000-series scopes with CRT readout. It will function in any compartment. The input section is galvanically isolated, allowing the input to float ±1500 volts with respect to chassis ground.
Key Specifications
| Functions | DC Volts, DC Current, Resistance, Temperature |
|---|---|
| Voltage Ranges | 1.999 V, 19.99 V, 199.9 V, 1000 V |
| Input impedance | 10 MΩ |
| Current ranges | 1.999 mA, 19.99 mA, 199.9 mA, 1999 mA |
| Resistance ranges | 199.9 Ω, 1999 Ω, 19.99 kΩ, 199.9 kΩ, 1999 kΩ |
| Temperature | -55 °C to +125 °C, requires P6058 voltage/temperature probe |
Internals
The 7D13 consists of an analog pulse width modulator front-end built with 741 op amps and dual FETs, and a 3½ digit counter section using standard 74xx TTL parts which is interfacing with the readout system. The front end is isolated using transformers used for pulses and a floating ±15 V supply. The Probe jack for the P6058 has contacts for the temperature sensor (a diode-connected transistor) as well as the voltage input terminals.
Links
Pictures
-
-
from manual
