R116

The Tektronix R116 is a programmable pulse generator introduced in 1968 for use with automated measurement systems such as the 240 and R250.

The R116 uses a 1N3716 tunnel diode to produce pulses.

Manuals

• Description of R116 from Tektronix Automated Testing Systems book (PDF)
• Tektronix R116 Manual (early, PDF)
• Tektronix R116 Manual (late, PDF)
• Tektronix R116 Manual Changes at Serial Number 1121 (PDF)
• Tektronix R116 in 1968 Catalog (PDF)

Key Specifications

Pulse period	100 ns to 11 ms (± 3%)
Pulse delay	50 ns to 550 μs (± 3% + 10 ns)
Pulse width	50 ns to 550 μs (± 3% + 10 ns)
Rise time	10 ns to 110 μs (± 10% below in 1 ns and 10 ns ranges, ± 5% above)
Fall time	10 ns to 110 μs (± 10% below in 1 ns and 10 ns ranges, ± 5% above)
Pulse amplitude	0.4 V to 10 V into 50 Ω, positive or negative (± 3% + 15/25/50 mV)
Pulse offset	0 to ±5 V in 3 ranges (± 5% + 200 mV)
Features	"Programmable" Double pulse mode

The R116 has a programming connector in the back. Eight operating parameters can be programmed digitally (by switch closure):

• Trigger Source
• Mode
• Period Range
• Delay or Burst Time Range
• Width Range
• Amplitude Range
• Polarity
• Rise Time/Fall Time Range

Seven more parameters are controlled by connecting external resistances:

• Period Multiplier
• Delay or Burst Time Multiplier
• Width Multiplier
• Amplitude Multiplier
• DC Offset
• Rise Time Multiplier
• Fall Time Multiplier

Pictures

• 
• 
•