User talk:Peter

Hi Peter, and thank you for the warm welcome.

I figured someone might go through the 067-0532-01 page and make a few changes. It's been several years since the last time I did any kind of programming or page design, so I had to figure out how to set up the page by looking at the source/page comparison of a few other pages on here. Is there some sort of resource I could have a look at which will show me a list of marcos and their output?

There are some nice photos of the 067-0532-00 coming up - I have the unit completely torn down, oscillator is in pieces as well. I'll make sure I get plenty of photos of the internals as I reassemble it. The unit is getting 95% of it's resistors replaced as well as all of it's capacitors. It's serial is "102" and I am very curious as to it's date of manufacture.

I hope I am using the talk: function correctly here!

Regards, Brian

---

Hi Peter, Thanks for your message, and sorry I'm just seeing it now, and I hope I'm responding to it correctly (still learning the wiki ropes). I've got a fairly late model D90 so I'd always just assumed I had the latest firmware. I don't see anything in the menu for lens correction, but I'll dig into this, since the pincushioning been a long-standing annoyance. A nice prime macro lens is on the short-list.

I'm about to upload another few photos, but after this, I'll try to upgrade if possible.

thanks!

Paul

update - I was actually quite a few revs behind (1.002 to 1.009). The update did seem to help somewhat; still not perfect, but better.

thanks again!

---

Hi Peter,

The internal 7014 maintenance doc (thanks for uploading!) talks about the P7100 and P7101 CRTs but I wasn't able to find a clear explanation of what the difference is, and which contain the different CRTs. Do you know?

-Kurt