Pulse Instruments PI-702: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
* Manual needed[[Category:Manual needed]] | * Manual needed[[Category:Manual needed]] | ||
}} | }} | ||
The Pulse Instruments PI-702 is a single-width plug-in for Tektronix TM500-series power mainframes. | |||
It is a power supply providing two DC outputs, each of which can be varied from -25 V to +25 V. | |||
The voltages can be controlled by front-panel knobs, which include coarse and fine voltage controls, | |||
The voltages can be controlled by front-panel knobs, which include | |||
or by a digital signal sent to the PI-702 via the TM500 mainframe interconnect bus. | or by a digital signal sent to the PI-702 via the TM500 mainframe interconnect bus. | ||
When the PI-702 is controlled by a digital signal (DAC mode), it uses two Burr-Brown DAC80-CBI-I 12-bit current-output ADCs. | When the PI-702 is controlled by a digital signal (DAC mode), it uses two Burr-Brown DAC80-CBI-I 12-bit current-output ADCs. | ||
Revision as of 11:08, 15 May 2017
The Pulse Instruments PI-702 is a dual bipolar bias supply plug-in for the TM500 system.
The Pulse Instruments PI-702 is a single-width plug-in for Tektronix TM500-series power mainframes. It is a power supply providing two DC outputs, each of which can be varied from -25 V to +25 V.
The voltages can be controlled by front-panel knobs, which include coarse and fine voltage controls, or by a digital signal sent to the PI-702 via the TM500 mainframe interconnect bus.
When the PI-702 is controlled by a digital signal (DAC mode), it uses two Burr-Brown DAC80-CBI-I 12-bit current-output ADCs.
Specifications
please add
Photos
-
Front view
-
Right internal view
-
Left internal view
