7D12: Difference between revisions

7D12 (view source)

3 bytes removed , 8 July 2017

no edit summary

36,756

edits

@@ Line 15: / Line 15: @@
 * M1 is a digital multimeter module with DC voltage, resistance and temperature (with [[P6058]] or [[P6430]]) ranges.
-* M2 is a sample and hold module. The M2 can measure voltage from ground to a selected point, or the difference voltage between two points defined by a trigger signal.  When triggered by the delayed gate signal from a time base, this allows cursor-like measurements to be made.  The module has an aperture time of only 10 ns.  With repetitive signals, the period between the sampled points can be as short as 30 ns, in single shot mode it must be at least 150 μs.
+* M2 is a sample and hold module that can measure voltage from ground to a selected point, or the difference voltage between two points defined by a trigger signal.  When triggered by the delayed gate signal from a time base, this allows cursor-like measurements to be made.  The module has an aperture time of only 10 ns.  With repetitive signals, the period between the sampled points can be as short as 30 ns, in single shot mode it must be at least 150 μs.
 * M3 is a True RMS module.
 * [[067-0700-00]] is a calibration fixture.