11000 Series plug-in interface

The Tektronix 11000 Series plug-in interface is mechanically almost identical to the 7000 Series plug-in interface. The only mechanical difference is that it at the top of the connector. The 11000 Series has a had a protruding narrow horn where the 7000 Series plug-ins have a wider horn at the top of the connector with electrical connections in some cases, e.g., in the 7A21.

The Tektronix 11000 Series plug-in interface is electrically partially the same as the 7000 Series interface. The power pins are the same, and the signal out pins are the same. 7000-series plug-ins provide a single trigger feed to the mainframe on pins A13/B13 (differential). 11000-series plug-ins also provide a trigger feed on pins A13/B13, and also provide trigger signals on B37/B38 and B35/B36.

11000-series plug-ins do not implement the 7000-series readout interface. The pins that are used for readout in the 7000-series are not used in the 11000 Series.

In the 11000 Series architecture, the mainframe communicates with the plug-in over a serial digital link called SDI. SDI uses pins A20, A21, and B21 on the plug-in connector. Those pins were not used on vertical plugins in the 7000-series interface (and the 11000-series does not support horizontal plugins).

11000-series mainframes send a calibration voltage to plug-in via pins B35/B36. Those pins were not used in the 7000-series interface.

The 11000-series interface uses pin B20 as an "11k Detector". 11000-series plug-ins have a pull-up resistor on pin B20. 7000-series (vertical) plug-ins left pin B20 unconnected.

• 

  11000 Series connector

• 

  11000 Series pinout

• 

  7000 Series connector, for comparison

Pinout

	A side	B side
Pin	Function	Function
1	Sweep Gate	n.c.
2	Gate common	n.c.
3	n.c.	n.c.
4	n.c.	n.c.
5	Sequence clock	n.c.
6	Ground	Sequence Sync
7	n.c.	n.c.
8	+5 V	n.c.
9	+5.1 V	n.c.
10	+5.1 V	Ground
11	+Vertical	−Vertical
12	Signal Ground	Signal Ground
13	+Trigger	−Trigger
14	Ground	+5.1 V
15	n.c.	n.c.
16	n.c.	n.c.
17	n.c.	Ground
18	+15 V	-15 V
19	n.c.	n.c.
20	SDI data MF→PI	11k detector
21	SDI clock	SDI data PI→MF
22	Shield	Ground
23	n.c.	n.c.
24	n.c.	n.c.
25	n.c.	n.c.
26	n.c.	n.c.
27	n.c.	n.c.
28	n.c.	n.c.
29	-5 V	n.c.
30	-5 V	n.c.
31	n.c.	Ground
32	n.c.	Ground
33	Ground	n.c.
34	Ground	n.c.
35	−CH2 Trig out	Cal GND sense
36	+CH2 Trig out	Cal voltage
37	Ground	−CH1 Trig out
38	Ground	+CH1 Trig out

Pin group function legend

Plugin power

HF signals

Plugin control interface