262: Difference between revisions
No edit summary |
No edit summary |
||
| Line 27: | Line 27: | ||
Tek 262 program card relay1.jpg|Program Card Relay | Tek 262 program card relay1.jpg|Program Card Relay | ||
Tek 262 program card 018-0007-00 front.jpg|Program Card | Tek 262 program card 018-0007-00 front.jpg|Program Card v2 | ||
Tek 262 program card 018-0007-00 back.jpg|Program Card | Tek 262 program card 018-0007-00 back.jpg|Program Card v2 | ||
Tek 262 logic card front.jpg|Logic Card | Tek 262 logic card front.jpg|Logic Card | ||
Revision as of 19:08, 4 June 2018
The Tektronix 262 is a programmer for the Tektronix 6R1 and 6R1A digital plug-ins for the 567 sampling oscilloscope or the 261 relay box, or the S-311, S-300, or S-301 plug-ins.
It connects via a cable to J34 on the 6R1 or 6R1A. Small printed circuit boards called program cards fit into slots in a bus inside the 262. Each of these cards specifies one measurement. These program cards are configurable by the user.
The 262 has slots for up to eight program cards. They are activated one at a time, either manually by pressing program selection switches on the front panel of the 262, or by having the 262 execute the measurements automatically in sequence, or the measurements can be activated remotely when the 262 is slaved to another 262.
The 262 was discontinued after 1971.
-
Front
-
Front Left
-
Fromt Left
-
Front Right
-
Top Internal
-
Top Internal
-
Program Card
-
Program Card
-
Program Card Relay
-
Program Card v2
-
Program Card v2
-
Logic Card
-
Logic Card
-
Synchronizer Card
-
Synchronizer Card
-
Regulator Card
-
Regulator Card
-
Counter Card
-
Counter Card
-
Comparator Card
-
Comparator Card
-
Right Front Cards
-
Power Supply
-
Left Rear Connector Wiring
-
Right Rear Connector Wiring
-
Rear Left
-
Rear Right
-
Rear
-
Program Switch Internal
-
Front view
-
Rear view
-
Inside view
-
-
programming card
-
programming card
