PS503: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 1: | Line 1: | ||
{{TM500 | mfg=Tektronix | type=PS503 | function=triple power supply | class=power supply | image=Tek ps503a | {{TM500 | mfg=Tektronix | type=PS503 | function=triple power supply | class=power supply | image=Tek ps503a.jpg | introduced=1972 | discontinued=1995 | | ||
manuals= | manuals= | ||
* [http://w140.com/smb/PS503A_SM.pdf Tektronix PS503A Manual (OCR, PDF)] | * [http://w140.com/smb/PS503A_SM.pdf Tektronix PS503A Manual (OCR, PDF)] |
Revision as of 05:12, 12 January 2019
The Tektronix PS503 is a triple power supply plug-in for the TM500 system.
It supplies 0 to −20 V and 0 to +20 V at 1 A (0.4 A in low power compartments) as well as +5 V at 1 A.
The variable supplies can be adjusted independently or can track one another, and are floating; the 5 V output is ground referenced.
Key Specifications
— Variable outputs — | |
Output voltage | 0 to +20 V and 0 to −20 V |
Current limit | <100 mA to >1 A (0.4 A if used in low power compartment) |
Ripple and noise | <3 mVp-p @ 1 A |
— Fixed output — | |
Output voltage3 | 5 V ±5%, 1 A (ground referenced) |
Current limit | fixed 1 A |
Ripple and noise | <3 mVp-p @ 1 A |
Rear interface signals
- +20 V output (22A)
- −20 V output (22B)
- ±20 V common (24A, 24B)
(the connections below require various jumper changes in the PS503 as described in the manual)
- Remote resistor programming (via 25A, 25B)
- Remote voltage programming (via 25A, 25B)
- Remote sensing (+Sense 23A, −Sense 23B)
Pictures
-
PS503A, front panel
-
PS503A, left side
-
PS503A, right side
-
PS503A
-
PS503A
-
PS503A
-
Switch S95 in rear of PS503 (detects high power compartment)
-
PS503A Rear connector