106: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 17: | Line 17: | ||
* [http://w140.com/tek_106.pdf Tektronix 106 Manual (PDF)] | * [http://w140.com/tek_106.pdf Tektronix 106 Manual (PDF)] | ||
* [http://w140.com/106.djvu Tektronix 106 Manual (DjVu)] | * [http://w140.com/106.djvu Tektronix 106 Manual (DjVu)] | ||
* [[Media:Tek 106 irb no ocr.pdf|Tektronix 106 Instrument Reference Book (PDF, needs OCR)]] | |||
==Pictures== | ==Pictures== |
Revision as of 16:25, 30 May 2019
![](http://w140.com/tekwiki/images/thumb/b/bc/Tek_106_front2.jpg/300px-Tek_106_front2.jpg)
The Tektronix Type 106 is a square-wave generator introduced in 1966. It has four outputs:
- Fast Rise +Output: 500 mV into 50 Ω load, positive-going pulse, 1 ns rise time, 50 Ω output impedance, GR-874 connector
- Fast Rise −Output: 500 mV into 50 Ω load, negative-going pulse, 1 ns rise time, 50 Ω output impedance, GR-874 connector
- High Amplitude Output: 12 V into 50 Ω load, 12 ns rise time, 600 Ω output impedance, GR-874 connector
- Trigger Output: 100 mV into 50 Ω load, 50 ns rise time, 150 Ω output impedance, BNC connector
The 1 ns rise-time outputs are generated using diodes to clip a high amplitude signal. In units with serial numbers less than 1190, GaAs diodes were used for clipping. After serial number 1190, silicon diodes were used.
The high amplitude output stage of the 106 is made of four 7189A tubes in parallel. With moderate effort, the socket wiring can be made compatible with the 7189 aka 6BQ5.
Manuals
- Tektronix 106 Manual (PDF)
- Tektronix 106 Manual (DjVu)
- Tektronix 106 Instrument Reference Book (PDF, needs OCR)
Pictures
-
Front
-
-
Outputs
-
Rear
-
Schematic
-
Silicon Diode Conversion
-
106 pulse on 2235
-
-
-
-
-
-
-