P5210: Difference between revisions

Revision as of 04:54, 15 July 2019

The Tektronix P5210 is a 50 MHz high-voltage differential probe with a Tekprobe BNC connector.

Maximum Voltage	5,600 V (DC + pk AC) between leads, 1 kV_RMS CAT III (2,2 kV_RMSCAT II ) from ground; derate above 1.5 MHz
Attenuation	100:1 or 1000:1
Bandwidth	50 MHz (5 MHz limit switchable)
Common-Mode Rejection Ratio	>3000:1 @ DC (500 V), >10,000:1 @ 60 Hz, >300:1 @ 100 kHz, >300:1 @ 1 MHz
Input impedance	16 MΩ // 3.5 pF between inputs; 8 MΩ // 7 pF between each input and ground
Delay	20 ns
Output	50 Ω output drives 1 MΩ // 15-20 pF scope input; scope bandwidth should be ≥200 MHz
Features	visible/audible overvoltage indicator

@@ Line 1: / Line 1: @@
-[[File:P5210.jpg|thumb|300px|right]]
+[[File:P5210-3.jpg|thumb|350px|right]]
 The '''Tektronix P5210''' is a 50 MHz high-voltage differential probe with a [[Tekprobe BNC connector]].
-{{MissingSpecs}}
+{{BeginSpecs}}
+{{Spec | Maximum Voltage | 5,600 V (DC + pk AC) between leads, 1 kV<sub>RMS</sub> CAT III (2,2 kV<sub>RMS</sub>CAT II ) from ground; derate above 1.5 MHz }}
+{{Spec | Attenuation | 100:1 or 1000:1 }}
+{{Spec | Bandwidth | 50 MHz (5 MHz limit switchable) }}
+{{Spec | Common-Mode Rejection Ratio | >3000:1 @ DC (500 V), >10,000:1 @ 60 Hz, >300:1 @ 100 kHz, >300:1 @ 1 MHz }}
+{{Spec | Input impedance | 16 MΩ // 3.5 pF between inputs; 8 MΩ // 7 pF between each input and ground }}
+{{Spec | Delay | 20 ns }}
+{{Spec | Output | 50 Ω output drives 1 MΩ // 15-20 pF scope input; scope bandwidth should be ≥200 MHz }}
+{{Spec | Features |
+* visible/audible overvoltage indicator
+}}
+{{EndSpecs}}
 ==Manuals ==
-[[Category:Manual needed]]''please add''
+* [[Media:070-9895-03.pdf|P5210 High Voltage Differential Probe Service Manual]]
+==Pictures==
+<gallery>
+P5210.jpg
+P5210-2.jpg
+P5210-3.jpg
+P5210-4.jpg
+P5210A-1.jpg | P5210 A
+</gallery>
 [[Category: Differential Oscilloscope Probes]]
 [[Category:Tekprobe BNC]]