RSA603: Difference between revisions

Revision as of 17:20, 28 July 2019

{{{manufacturer}}}
Spectrum Analyzer 9 kHz to 3.0 GHz Tektronix RSA603A Produced from (?) to (?) Manuals 37W-60397-7 RSA600A Datasheet (PDF, OCR) 071-3460-00 RSA600A Installation-and-Safety-Instructions (PDF, OCR) 077-1031-04 RSA600 Series Spectrum Analyzers API Programming Reference (PDF, OCR) 071-3330-02 RSA DKIT Self-Guided Demo (PDF, OCR) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The RSA603A is a compact spectrum analyzer meant for lab or production line use with a frequency range of 9 kHz to 3.0 GHz. The user interface and display resides on a user-provided PC running SignalVu-PC software or a user-developed application. The host PC provides all power, control, and data signals over the USB 3.0 cable included with the instrument. An available SW API is provided to allow you to create your own custom signal processing application. A self guided demo board and guide can be found here RSA-DKIT.

Signal processing while running SignalVu-PC software provides real-time processing of for general signal analysis, analog modulation analysis, and RF measurements. This software can be programmed through the program’s interface or through the use of the included application programming interface (API). Post processing analysis of large sets of recorded data can be performed across multiple sets using DataVu-PC software.

The optional tracking generator enables gain/loss measurements for quick tests of filters, duplexers and other network elements, and the user can add cable and antenna measurements of VSWR, return loss, distance to fault and cable loss as needed.

Front panel inputs/outputs are: RF IN N connector (50Ω; ± 40V DC, +33 dBm max); RF Out/REFL In N connector (Tracking generator source connector); Ref In BNC connector (External frequency reference) ; Trig In BNC connector (10k Ω input; 5V TTL 10); ANT In SMA connector (To connect optional GPS/GNSS antenna); and USB 3.0 USB connector (USB 3.0 Type A connector) .

Rear panel input: US Power Plug (115 V nominal); Noise Source Drive BNC connector (28 V DC Out 140 mA Max). The Noise Source Drive doesn’t appear to be implemented as of yet but more information it can be gleaned from the Agilent Technologies document Noise Figure Measurement Personality Guide.

Key Specifications

Frequency Range	9 kHz to 3.0 GHz
RF Input impedance	50 Ω
Maximum Safe Input Power	+33 dBm ± 40V DC Max, RF Attn ≥20 dB
Input RF Attenuator	0 dB to 51 dB (1 dB step)
Dynamic Range (Spurious Free)	70 dB
Reference Level Range	-170 dBm to +40 dBm (0.1 dB step)
Sweep Speed (Full speed)	70 GHz/sec (RBW: 1 MHz); 60 GHz/sec (RBW: 100 kHz); 15.7 GHz/sec (RBW: 10 kHz); 1.7 GHz/sec (RBW: 1 kHz)
Acquisition (IF) Bandwidth	40 MHz
Real-Time IF Acq Data and Bit Width	112 Ms/s, 16 bits
Minimum Signal Duration for 100% POI	27 µsec to 40 MHz
Trigger Threshold Range	0 dB to -50 dB from reference level, for trigger levels > 30 dB above noise floor
Trigger Types	Rising edge, falling edge, schmitt
Trigger Levels	Positive-going: 1.6 V min, 2.1 V max; Negative-going: 1.0 V min, 1.35 V max
Displayed Average Noise (Preamp off)	−130 dBm/Hz to −145 dBm/Hz
Phase Noise (1 GHz CF)	≤-94 dBc/Hz to ≤-116 dBc/Hz
Included Accessories	Quick-Start manual; USB 3.0 cable (2 M); Screw lock; connector covers; Shoulder strap; Carrying case (with room for unit, tablet, accessories); Power core; SignalVu-PC software, API and documentation file, and USB memory
Weight	2.79 kg (6.15 lbs)
Power & Dissipation (fully loaded)	115V (nom US), 45 W max
Operating Atmospherics	Temperatures: -10 °C to +55 °C; Humidity: 5% to 95% from +10 °C to +30 °C; Altitude: Up to 3000 m (9842 ft)

Instrument Options

Opt. 04: Tracking generator (9 kHz to 3.0 GHz)

Service Options

Opt. C3: Calibration Service 3 Years
Opt. C5: Calibration Service 5 Years
Opt. D1: Calibration Data Report
Opt. D3: Calibration Data Report 3 Years (with Opt. C3)
Opt. D5: Calibration Data Report 5 Years (with Opt. C5)
Opt. R5: Repair Service 5 Years (including warranty)

Recommended Accessories

Panasonic FZ-G1 Toughpad tablet controller: Recommended for portable field applications (https://na.panasonic.com/us/computers-tablets-handhelds/tablets/tablets/toughpad-fz-g1)
Many more Adapters, Attenuators, 50/75 Ω pads, Antennas, EMC accessories, Filters, Probes, and the RSA-DKIT Demonstration board. Review datasheet for details.

Video

An excellent review of the RSA600 Series Spectrum Analyzer can be watched here but also includes tests being done to show how it works in real world measurement situations:

Tektronix RSA607A Real-Time Spectrum Analyzer Review, Teardown & Experiment

Pictures

@@ Line 61: / Line 61: @@
 ==Video==
-* An excellent review of the RSA600 Series Spectrum Analyzer entitled "Tektronix RSA607A Real-Time Spectrum Analyzer Review, Teardown & Experiment" can be watched here but also includes tests being done to show how it works in real world measurement situations:
+* An excellent review of the RSA600 Series Spectrum Analyzer can be watched here but also includes tests being done to show how it works in real world measurement situations:
 [https://www.youtube.com/watch?time_continue=318&v=CFQxqZcWGHg Tektronix RSA607A Real-Time Spectrum Analyzer Review, Teardown & Experiment]